|
| macxr8 |
|
||
Age: 55 Posts: 451 Joined: 3rd Jan 2005 Ride: AU XR6 with BF Turbo engine Location: Sydney |
yea
_________________ RIP |
||
| Top | |
||
| Froudey |
|
||
|
so doing this joining the 87 and 30 will the car start when the key is on as it normally would????
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| macxr8 |
|
||
Age: 55 Posts: 451 Joined: 3rd Jan 2005 Ride: AU XR6 with BF Turbo engine Location: Sydney |
that picture is a relay and NOT the inhibitor switch.
macxr8 wrote: get ur test light, hold the key to start, find the wire that has power, release key, make sure light goes off. this is the wire form the Ign switch. The same color wire sld be going to the starter, join the two and car will crank
if the wires are not the same colors, do the same as above, and while cranking touch the end of the wire to each of the other three in turn and the find the starter wire that way. BTW you will need the relay in place for the car to crank
_________________ RIP |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 83 guests |
1x confused Falcon..EL Falcon with full AU running gear...VCT, 5 speed, IRS, AUII front suspension, brakes, and steering RIP