Fordmods Logo

Explanation For rough idle? ( at the end of my rope here ) 

 

Page 1 of 1 [ 13 posts ] 

 
 Post subject: Explanation For rough idle? ( at the end of my rope here )
Posted: Mon Aug 20, 2007 7:37 pm 
Stock as a Rock
Offline
User avatar

Posts: 130

Joined: 29th Dec 2004

Gallery: 3 images

Location: wollongong
NSW, Australia

ok the car is an I6 EL Fairmont ghia, i have changed plugs, leads, dizzy cap and rotor button also had injectors cleaned properly. it doesent have an aftermarket cam in it. the only thing i can think of is the timing or the lobes on the cam have worn abnormaly for some reason.

the only work its had done concerning the cam is the timing chain, gear and other parts were replaced but that was over two years ago othe than that the motor is in A1 condition. any sugestions???????

 

_________________

" If you aint first, Your last!"

Top
 Profile  
 
 
Posted: Mon Aug 20, 2007 7:49 pm 
Getting Side Ways
Offline
User avatar

Posts: 3115

Joined: 20th Dec 2004

Ride: Falcon

Location: Adelaide
SA, Australia

Have you run diagnostics?

could be a vacuum leak. Check the vacuum hoses for splits and spray some carby cleaner around the intake manifold gasket and listen for a change in rpm.

 

_________________

Stoke me a clipper, I'll be back for Christmas

Top
 Profile  
 
 
Posted: Mon Aug 20, 2007 11:06 pm 
Getting Side Ways
Offline

Posts: 975

Joined: 15th Nov 2004

Ride: el wagon

Location: melbourne
VIC, Australia

Using either a kiddies toy stethescope, or a piece of garden hose, listen for air leaks at the injectors. The o-rings are old enough now to be a bit brittle and leaky.

New o-rings from Fraud are $10ish each,(you need 12 :shock: ) so it is cheaper to go to ebay and buy a set of reco'd injectors for $105 delivered.

Cured my idle problems 8-)
Top
 Profile  
 
 
Posted: Mon Aug 20, 2007 11:14 pm 
Getting Side Ways
Offline

Age: 55

Posts: 451

Joined: 3rd Jan 2005

Ride: AU XR6 with BF Turbo engine

Location: Sydney
NSW, Australia

or you can PM me and I have a little bag of the O rings for sale

 

_________________

RIP :( 1x confused Falcon..EL Falcon with full AU running gear...VCT, 5 speed, IRS, AUII front suspension, brakes, and steering RIP

Top
 Profile  
 
 
Posted: Tue Aug 21, 2007 12:06 am 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

Since the injectors have been removed and installed - have the electrical connectors been fitted and clipped correctly ???

If you don't know when the fuel filter has been changed last, then a new one might be wise.

Check the base timing when checking diagnostics.

While you've got the timing light out - check each plug lead for regular pulsing.

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
Posted: Tue Aug 21, 2007 4:10 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 607

Joined: 15th Dec 2004

Gallery: 23 images

Ride: GLXR 6

Location: Perth
WA, Australia

O2 Sensor?

 

_________________

Image

Top
 Profile  
 
 
Posted: Tue Aug 21, 2007 7:52 pm 
Stock as a Rock
Offline
User avatar

Posts: 130

Joined: 29th Dec 2004

Gallery: 3 images

Location: wollongong
NSW, Australia

ive taken the o2 sensor out and cleaned it up, ill try running the diagnostics on it on the weekend, and ill also check the other items you guys suggested. thanx for the help and will let you know what comes up.

 

_________________

" If you aint first, Your last!"

Top
 Profile  
 
 
Posted: Tue Aug 21, 2007 8:47 pm 
Getting Side Ways
Offline

Posts: 476

Joined: 28th Jan 2005

Ride: 1990 EA Spac

Location: grenfell
NSW, Australia

I had a rough idle and it was a blown inlet manifold gasket. I was told to run the motor and spray WD40 along the join of the manifold and head. When it came to the area where air was leaking in the idle changed. I tightened the manifold bolts a little and it was all good. Then I replaced the gasket to make sure.

 

_________________

Drive safe, arrive alive

EA Spak EL dash and interior, thermo's,BBM, EF head and cam, superlows,

Top
 Profile  
 
 
Posted: Tue Aug 21, 2007 9:19 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 824

Joined: 10th May 2007

Ride: Xr6 Turbo

Location: Melbourne
VIC, Australia

wat about isc??? idle speed control.. check for alot of carbon in there take it all apart give it a good cloean with carby cleaner. see how that treats you.

 

_________________


Previous cars


1995 ef futura - nothing special
2003 xr6 turbo 5 -speed 307rwkw

Top
 Profile  
 
 
Posted: Tue Aug 21, 2007 10:46 pm 
Technical Contributor
Offline
User avatar

Age: 39

Posts: 2516

Joined: 7th Nov 2004

Gallery: 4 images

Ride: LS3 VF

Location: Bunbury
WA, Australia

can also be a failed/ing cylinder head gasket. get it TK Tested to be sure, carbon build up behind the valves?
Top
 Profile  
 
 
Posted: Thu Aug 23, 2007 7:48 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 1832

Joined: 3rd May 2007

Gallery: 8 images

Ride: AUII XR6 Uterus

Location: South Coast
NSW, Australia

or you could go to somewhere that sells o-rings n match them for around 2c each or go to a decent mechanic/engine reco (read:not a theiving maggot cumstain)

 

_________________

Not to get technical, but according to chemistry alcohol is a solution.

Top
 Profile  
 
 
 Post subject: rough idle
Posted: Thu Aug 23, 2007 9:17 pm 
Getting Side Ways
Offline
User avatar

Posts: 708

Joined: 9th Nov 2004

Ride: Falcon

Location: Liverpool
NSW, Australia

take it to a shop where they have a 4 gas exhaust anylizer , CO, HC, O2 & CO2 are all there to use & read if every thing else fails, of corce you start with all the basics.. (cylinder leakage test) etc.....
Top
 Profile  
 
 
Posted: Fri Aug 24, 2007 12:59 am 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 3737

Joined: 22nd May 2006

Ride: BF F6 Tornado - #0077

Location: Bendigo
VIC, Australia

the caps in the ecu. a thread was done a while ago on it.

the go real easy, solder some new ones in and that can solve the issues.

 

_________________

** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html

F6 Tornado 2006 Build

Is it about sex? The engine in my car? Or a cure for cancer?
No?

Then f**k off

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 13 posts ] 

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot] and 77 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Nov 28, 2024 7:37 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names