Hey Guys

Im about to change my car to manual in the coming couple of weeks...

Quick question for those of you who have manual cars. Where did you guys run your power wire for your sub? Mine is currently through the clutch cable hole, and im wondering where i can move it to...

I remember when installing it originaly dad thought it was too hard to get it up through the bonnet release cable hole, but im wondering if thats possible?

Thanks in advance

Hey mate there is a big grommet to the left (when standing in the front of the car looking at it) of the clutch hole. I think it has the engine loom etc going through it. This is a good one to use bit of a bastard but it works well. I have 4 gauge running through there on my XR8 and have heard of people putting 0 gauge through there which I will have to do shortly. Have a look I think it is kinda to the left and under the brake booster from memory. Put a small cut in it and push a coat hanger or bit of wire through and tape your cable on and pull it through with the wire. Just be careful that you don't cut any of the loom!

http://www.fordmods.com/forums/viewtopic.php?t=22390

I just drilled a hole about 40mm from the clutch cable hole