Fordmods Logo

Turbo upping boost 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: Turbo upping boost
Posted: Sat Feb 12, 2005 6:41 pm 
Stock as a Rock
Offline
User avatar

Posts: 190

Joined: 7th Nov 2004

Ride: EF Mont ZL Lane 4x4 Bronco

Location: Widebay
QLD, Australia

I bought a boat with a diesel 6 cyl turbo
the standard boost is 7 psi but there was an optional version with 14psi
I'm new to the turbo scene, so can someone tell me how you go about it?

the best engine torque curve/economy is at about 2700rpm (so this is likely what ill keep it at) and redlines at about 3600 rpm
Top
 Profile  
 
 
Posted: Sun Feb 13, 2005 12:24 am 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

What sort of motor and boat ?? A friend in N.Z has a Nissan Diesel turbo motor in his boat and it flies!!! Strangely enough its the 3.3 turbo beats most std'sh V8s and only uses $20 fuel on all day trip....

Does it have intercooler ? You could fit a water to air intercooler..
Is this turbo fitted with a wastegate? If so all you need is a bleed off valve that fits on your wastegate line...Around $100.00
Also make sure there is NO restriction on turbo dump pipe...

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
Posted: Sun Feb 13, 2005 11:30 am 
Stock as a Rock
Offline
User avatar

Posts: 190

Joined: 7th Nov 2004

Ride: EF Mont ZL Lane 4x4 Bronco

Location: Widebay
QLD, Australia

is a 27' flybridge cruiser 165hp volvo penta (yea i know!)
apparently 6-7ltr/hr @ ~8knots & 11knots max, so its pretty slow & looking to spice it up without blowing it up!
not sure about wastegate?
I dont know how to upload pic attachments yet
any info on water to air intercoolers
it was an option to have a aftercooler fitted ??
I dont know how much boost is at 2700 but if it was possible for a blowodd valve would this increase boost at this rev range on mainly only on full revs?
Top
 Profile  
 
 
Posted: Sun Feb 13, 2005 7:04 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2832

Joined: 7th Nov 2004

Gallery: 4 images

Ride: Lincoln LS, MKII Escort, ED

Location: geelong
VIC, Australia

the bleed off valve increases the maximum boost the turbo will deliver, motor size VS turbo size will decide at what RPM's this happens at

 

_________________

Because i can.

Top
 Profile  
 
 
Posted: Mon Feb 14, 2005 12:15 am 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

http://www.volvo.com/volvopenta/global/ ... diesel.htm

Which one ?

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
Posted: Mon Feb 14, 2005 5:17 pm 
Stock as a Rock
Offline
User avatar

Posts: 190

Joined: 7th Nov 2004

Ride: EF Mont ZL Lane 4x4 Bronco

Location: Widebay
QLD, Australia

heres this link
http://www.volvo.com/NR/rdonlyres/2E061 ... 976_en.pdf
thanks EBXR8380
startin to think I got ripped now says 135hp
165hp with aftercooler which mine doesnt have(cools the aircharge after going thru the turbo): http://www.volvo.com/NR/rdonlyres/FE4F0 ... 982_en.pdf
page 2 - aqad40b/280 item 6
Top
 Profile  
 
 
Posted: Mon Feb 14, 2005 7:37 pm 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

You could fit a water to air intercooler from Subaru's turbo engine or similar for example? Seeing as you no doubt have plenty of water...Need closer look at that turbo to see if they use a wastegate to control boost? Either that or they fit a turbo JUST big enough for the engine...So it won't or cannot overboost...A boat that size takes a s**t of power to get up and going...My Bro has charter boat in Bay of Islands..Waima Star name of boat..It has a V8 turbo Cat 350 h.p and does about 22 knots...It has been de-rated in power as its a charter boat...

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
Posted: Mon Feb 14, 2005 8:05 pm 
Stock as a Rock
Offline
User avatar

Posts: 190

Joined: 7th Nov 2004

Ride: EF Mont ZL Lane 4x4 Bronco

Location: Widebay
QLD, Australia

PM me your email and I'll send you a closer pic of the turbo tomorrow
Top
 Profile  
 
 
Posted: Tue Feb 15, 2005 7:21 pm 
Stock as a Rock
Offline
User avatar

Posts: 190

Joined: 7th Nov 2004

Ride: EF Mont ZL Lane 4x4 Bronco

Location: Widebay
QLD, Australia

Top
 Profile  
 
 
Posted: Thu Feb 17, 2005 11:20 pm 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

It looks like they made the compressor housing "small" so there is no chance of over boosting...Either look around for another turbo or upgrade that one...??

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
Posted: Fri Feb 18, 2005 12:50 pm 
Stock as a Rock
Offline
User avatar

Posts: 190

Joined: 7th Nov 2004

Ride: EF Mont ZL Lane 4x4 Bronco

Location: Widebay
QLD, Australia

so there is no wastegate on it?
how would I upgrade this one (by adding a wastegate??)
what size would this one be / what size should I be after (3.6L / opt @ 2700)?
if it is a small turbo, wouldn't that would be better to spool up at mid revs?
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 30 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 12:27 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names