|
| MooseMan |
|
|||
|
The last few days my clutch has been playing up and today it got really bad. It doesn't seem to be disengaging properly. When Im driving along if I floor it then the car just revs like its in neutral or im slightly riding the clutch. I can drive the car and it goes OK until I accelerate a little.
Do I need a new clutch or something else?
_________________
|
|||
| Top | |
|||
| alfy |
|
|||
|
hmmm sounds like its slipping a bit. might just need adjusting.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| phongus |
|
|||
|
Sound like your clutch is slipping, so I'll agree with alfy on that. Or the clutch may be a little bit more worn then when you installed it, so you can adjust the clutch cable.
phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| MooseMan |
|
|||
|
yeh clutch is only like 4mths old so I don't think it wuold be worn.
_________________
|
|||
| Top | |
|||
| rizzo |
|
||
|
definately slipping its heart out, hope you dont fry it cause of all the slipping its doing.
_________________ If it moves, weld it down! |
||
| Top | |
||
| dsheps83 |
|
|||
|
had this problem in the barina, it was the pressure plate in the end
|
|||
| Top | |
|||
| 67RCE |
|
||
|
I had this exact problem in my ED, it turned out to be a rooted clutch cable, check the cable and if it is fine, re-adjust it and then go for a drive
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| fordman351 |
|
|||
|
dsheps83 wrote: had this problem in the barina, it was the pressure plate in the end
I was going to suggest this. If the clutch is new, maybe the wrong pressure plate has been supplied and does not have a enough force to keep the friction plate clamped. If it was the cable, it would only affect the disengagement of the clutch, if it wasn't fully disengaging the definately the cable would be stretched or the firewall would be cracked or warped from the force of the cable pulling against it. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 102 guests |
