|
| mendyxr6 |
|
|||
|
recently changed a motor. tried to start it up this arvo but kept getting the brake fail light on the dash. its something vacuum related but not to sure on exactly what. any1 know how to fix this problem
_________________ kangaroos and radiators are a bad mixture |
|||
| Top | |
|||
| mendyxr6 |
|
|||
|
anybody any idea ....barking up the wrong tree???????
_________________ kangaroos and radiators are a bad mixture |
|||
| Top | |
|||
| NUTZEF |
|
||
|
1 make sure your hand brake switch is not sticking
2 could have a leak in your master cylinder 3 brake fluid low 4 there is also a switch under the master cylinder that could be faulty had same problem and it was the cruise cut of switch on the master cylinder
_________________ WOLF V500, t66(ar70 compressor), rochester 550cc injectors, borgg 265l fuel pump, 48mm turbosmart gate, turbosmart plumb back bov, 600x300x100 cooler, 3 inch zorst , 3.45 lsd, xr6 head, wade 1604 cam, adjustable cam gear, K&N pod filter, on 10psi and manual convertion exedy button clutch. 285.6rwkw |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 88 guests |
