|
| braidy |
|
|||
|
Hey guys.
Took off the engine lug on the intake side of my block tonight, had a rag under the lower thermostat housing to catch the coolant. Tried to start the car, and nothing. Seems the coolant got onto the TFI module. What I am wondering is, are the TFI modules unable to handle a bit of water? Would this be what is stopping the spark? Screwed module? Thanks. Braiden.
_________________ RIP Chelsea |
|||
| Top | |
|||
| 67RCE |
|
||
|
new rotor button and dizzy cap mate, dizzy is flooded
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| joolz |
|
|||
|
Check for spark. If no spark remove dizzy cap and ensure its dry, if not spray WD 40 or similar. Check TFI module plug is dry inside. Also ensure plug lead caps are dry and again spray WD 40 or similar as you may have water shorting the spark. Its possible especially if the engine was still warm and water got on to the coil is has or already cracked and taken in water.
|
|||
| Top | |
|||
| braidy |
|
|||
|
Mustve just been a bit wet. Let it sit for a while, and it just started! So everythings sweet now, and it has a polished lug! Thanks guys.
_________________ RIP Chelsea |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 82 guests |
