Fordmods Logo

12v breaker. How? 

 

Page 2 of 2 [ 24 posts ] Go to page Previous  1, 2

 
Posted: Thu Sep 20, 2007 2:56 am 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 501

Joined: 25th Apr 2006

Ride: ED GLi Classic

Location: Ballarat
VIC, Australia

66 coupe wrote:
if a fire starts, killing the power really wont do much. The fire needs fuel, and turning the key off will stop that.


I am not talking about in the engine bay, I am talking about the whole car. For example, I want the isolator switch in the boot and I want the switch to kill power to absolutely everything. So say a short happens in my wiring in the boot and sparks which starts a fire, I could stop the spark with the switch.

 

_________________

RIP Chelsea
96 EF2 Gli - T5 / Exedy / Wade 977b / P+P / JMM Extractors, 2.5" / Port matched BBM / and more
bmICE

Top
 Profile  
 
 
Posted: Thu Sep 20, 2007 9:42 am 
Oompa Loompa
Offline

Posts: 29

Joined: 16th Jan 2007

Location: Kalgoorlie
WA, Australia

When the engine is stopped the only source of electricity is the battery. When the engine is running, the alternator also creates electricity, usually enough to keep engine running and recharge the battery. A normal wire would probably burn out and discontinue the circuit before you could pop the boot and flick the switch. Unless you wanted to put a switch on every wire in the car to isolate power individually to everything, turning off the key will iso most things including ignition spark, fuel. Battery iso switch will do everything once ignition is switched off, which in turn stops alternator creating the other power source. An extra switch on ignition wire could be put in boot as well but....
Top
 Profile  
 
 
Posted: Sun Sep 23, 2007 4:25 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 4849

Joined: 19th Feb 2005

Gallery: 1 images

Ride: BA Falcon Suzy Across

Power: 178 rwkw

Location: melbourne
VIC, Australia

Use a contactor. A contactor is effectively a big relay which can handle lots more current and has silver contacts to stop them burning out when they arc. They usually have 3 inputs so you can divide your wiring up into 3 and spread it across. Get 1 with 3 normally closed contacts so it doesn't need to be energised to let the power pass through it. Make sure it has a 12v DC coil. go from your battery +ve to a switch, from the switch to the contactor coil and from there to -ve terminal.

So if you turn the switch on, the contactor coil energises and disconnects all subsequent circuits hooked up to it.

edit: can one of the mods please fix gyzmos URL so the thread isn't f**k up. :)

 

_________________

178.3 rwkw
15.1@96 mph
Now with 3.9 shrooms

Top
 Profile  
 
 
Posted: Sun Sep 23, 2007 9:08 pm 
Tyre Shredder
Offline

Posts: 322

Joined: 27th Jan 2006

Location: Hobart
TAS, Australia

smiley235 wrote:
Use a contactor. A contactor is effectively a big relay which can handle lots more current and has silver contacts to stop them burning out when they arc. They usually have 3 inputs so you can divide your wiring up into 3 and spread it across. Get 1 with 3 normally closed contacts so it doesn't need to be energised to let the power pass through it. Make sure it has a 12v DC coil. go from your battery +ve to a switch, from the switch to the contactor coil and from there to -ve terminal.

So if you turn the switch on, the contactor coil energises and disconnects all subsequent circuits hooked up to it.


They are made to extinguish an AC arc, won't work well for high current DC. As long as you aren't using massive current when you switch it off, it should work though.
Top
 Profile  
 
 
Posted: Sun Sep 23, 2007 9:15 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 4849

Joined: 19th Feb 2005

Gallery: 1 images

Ride: BA Falcon Suzy Across

Power: 178 rwkw

Location: melbourne
VIC, Australia

hmm, true. We always use them at work but only for AC, not sure bout DC in this case.

 

_________________

178.3 rwkw
15.1@96 mph
Now with 3.9 shrooms

Top
 Profile  
 
 
Posted: Sun Sep 23, 2007 9:16 pm 
Technical Contributor
Offline
User avatar

Posts: 691

Joined: 1st Jun 2005

Ride: EFII Sedan

Location: Brisbane
QLD, Australia

Hopefully it wouldn't be used that often for the tips to melt that significantly.

The problem with using a normally closed setup is you're using power to disconnect power - if the fault has caused a malfunction in your circuit, you may not be able to activate the contactor.

Another aproach would be to use the normally open tips, but your ECU is going to need its KAM power regardless, so think your circuit through.

 

_________________

EF II Sedan
Ex Chaser, Dual Fuel (Impco LPG)
LSD High, 3.23, Black wheels, other shiny bits.

EB II Sedan <--- R.I.P. (Rest in pieces - gone to the wreckers for $50...... bargain!)

Top
 Profile  
 
 
Posted: Mon Sep 24, 2007 1:31 am 
Getting Side Ways
Offline
User avatar

Posts: 1079

Joined: 18th Sep 2005

Ride: AUII Fairmont

Location: Belmont
WA, Australia

A relay inline with the main fusible link.
This will cut the power to everything bar the starter motor (and depending on model, the ABS module)

Won't however cut the power line to the battery in the boot.
Top
 Profile  
 
 
Posted: Mon Sep 24, 2007 10:44 pm 
ACT Cruise Moderator
Offline
User avatar

Age: 43

Posts: 6249

Joined: 24th Nov 2004

Ride: '06 BF GT-P

Power: 293 rwkw

Location: Canberra
ACT, Australia

Jaycar sell a 120A circuit breaker (designed for car audio use), but it's got a switch on it too, so as long as your expected load isn't more than 120A it'll work fine for any purpose.

 

_________________

1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow
2006 BF GT-P in Ego, mods. Supercharged 5.8L all alloy modular

Top
 Profile  
 
 
Posted: Wed Sep 26, 2007 1:13 pm 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 501

Joined: 25th Apr 2006

Ride: ED GLi Classic

Location: Ballarat
VIC, Australia

Lots of useful information here, thanks guys!

 

_________________

RIP Chelsea
96 EF2 Gli - T5 / Exedy / Wade 977b / P+P / JMM Extractors, 2.5" / Port matched BBM / and more
bmICE

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 24 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 28 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Nov 19, 2024 11:19 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names