|
| @rt |
|
||
|
Hi Guys,
One of the bolts that holds the exhaust to the other part of the exhaust with the catalytic converter in it has come out, and now I have a leak, and only one bolt holding it. Any tips on the type or size of bolt to use? It's an EL Falcon. Cheers, Art.
_________________ Gamer = Lamer |
||
| Top | |
||
| ...Dunkly |
|
||
|
Just get the best fitting bolt you can, try not to have too much thread stickin out, do it up as tight as u can. Dont bother about using Nylocks either because the nylon will just melt anyway
|
||
| Top | |
||
| cjh |
|
|||
|
...Dunkly wrote: Just get the best fitting bolt you can, try not to have too much thread stickin out, do it up as tight as u can. Dont bother about using Nylocks either because the nylon will just melt anyway
You can use "Cone lock" nuts. They don't come loose in a hurry.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| @rt |
|
||
|
So there's no special type for the heat then?
Thanks 
_________________ Gamer = Lamer |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 86 guests |
