selling this cam - people have had great results with this cam, but I couldnt quite get it working properly on my EL - the best result I got was 133rwkw, really never worked out what the problem was but it couldnt really have been the actual cam itself, I decided to stop wasting money on the car for a bit and put the factory one back in... this sale does not include a performance guarantee !

Anyway, the cam is a regrind, so needs shims. I will supply you with the washers I used to shim it, or you can buy genuine ford shims from a wrecker. It also needs a beefier set of springs (available from rocket industries for $110+shipping).
Cam is in good condition, just recently came out of my engine

I would prefer pickup (i am in bundoora, melb) or meetup somewhere, looking for about 80$ for the cam but open to offers (sale is for cam+shim washers only, no vernier gear etc). willing to give you a hand putting it in or lend you my spring compressor etc (for changing valve springs with the head on) if you're reasonably close.

(will add a pic when i get home from work... but yeah... it looks like most camshafts )

I'm interested in the cam.
Will this cam be ok on a 3.9 cpfi motor?

hmmm... CPFI, not too sure, I don't think many people have done too many modifications to the CPFI's! Technically it should work, but i dont know for sure...! the CPFI computer might not cope with mods very well


*edit* cam sold pending payment... whoah that was quick