|
| blacksabbath189 |
|
|||
|
alright i've been searching all morning, but haven't found much information. what do i do with the aircon reciever/dryer canister when fitting an intercooler? is there enough room to squeeze in a 600*300*100 or even a 600*300*76 sized cooler, and still be able to fit the front bumper back on, with some modification of course. just wondering what other ppl have done.
cheers!
_________________ Slavery, gets s**t done! |
|||
| Top | |
|||
| Tezza393 |
|
|||
|
Dont call me silly but here is one option
GUTT the interior, obviously leave the drivers seatbelt and steering wheel and pedals, bolt a milk crate down in there so you got somethin to sit on, now since their is no dash and no aircon unit inside the cab that fixes the dryer problem on the outside.... throw it all out, get a shorter belt so the power steerin still works and what do you know IT FITS.... and you will maybe go faster ..... not to sure yet. let me know what you think Tommeh boy
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
| Top | |
|||
| na319 |
|
||
|
{USERNAME} wrote: GUTT the interior, obviously leave the drivers seatbelt and steering wheel and pedals, bolt a milk crate down in there so you got somethin to sit on,
now since their is no dash and no aircon unit inside the cab that fixes the dryer problem on the outside.... throw it all out, get a shorter belt so the power steerin still works lol |
||
| Top | |
||
| Delta |
|
||
|
what car/model?
|
||
| Top | |
||
| Tezza393 |
|
|||
|
tis his EB XR6
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
| Top | |
|||
| Delta |
|
||
|
{USERNAME} wrote: tis his EB XR6
My mates EB deleted the aircon to fit the 600x300x100, but I'm pretty sure its possible to relocate the reciever dryer if you really want, just costs to have the new steel lines made up etc, to mount it in the engine bay. Also you need to cut away a fair portion of the lower part of the bumper, which means the intercooler is out in the open air all unprotected, and highly visible. Its certainly possible and fits quite well but EF-EL is MUCH easier, and better concealed. |
||
| Top | |
||
| blacksabbath189 |
|
|||
|
F**k
thats all im gona say tempted to rip it all out, get the condensor out of there as well put a screwdriver in the valve and run like f**k haha good plan? i think so, can always put it back in later i spose
_________________ Slavery, gets s**t done! |
|||
| Top | |
|||
| Delta |
|
||
|
GO and have the aircon degassed (the legal way) and then remove the aircon belt. After that you can do what you like, ie you can dummy it up, and mount stuff where you want it. Then when you want it connected, go back and have the lines made up, and regassed. Then you put the belt back on, and your set.
|
||
| Top | |
||
| blacksabbath189 |
|
|||
|
yer exactly, can the evaporater stay where it is? behind the dash? if i just block up the pipes that lead to it in the engine bay/firewall
cheers for your help delta
_________________ Slavery, gets s**t done! |
|||
| Top | |
|||
| ebs_4l |
|
||
|
i have a 600x300x100 in my eb, i retained the a/c, got a small inline rec/drier and mounted it above the cooler, modified the std steel lines myself. but yes, there is a s**t of cooler hanging out
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
| Top | |
||
| blacksabbath189 |
|
|||
|
ah thanks ebs, looks like i'll have to rip it out
 now my next problem is the ABS  , i thinks thats gona have to go, theres no room at all for piping. apparently i just need the front brake lines from a NON ABS falcon? is this correct, then it should be fine, and remove the computer ofcourse
_________________ Slavery, gets s**t done! |
|||
| Top | |
|||
| Delta |
|
||
|
You shouldn't have to remove the ABS, my mates is still in the factory location, and 3" piping fits....I'll go take some pics if hes ok with it, and I can find my digi camera
EDIT: Actually I stand corrected....I don't think his eb has abs |
||
| Top | |
||
| blacksabbath189 |
|
|||
|
ah ok, thought so, coz i just ripped the front bumper off and took out the headlights, there isnt any room at all, can anyone tell me exactly what i have to do, to get this mungel out
_________________ Slavery, gets s**t done! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 25 guests |
