|
TruBlu |
|
|||
|
Recently installed a trip comp into an ef GLi. The comp came with its own plug so I joined the required wires to that. Every thing works fine except when the lights are on and engine running the screen flickers. Any ideas?
_________________ I understand why people drive holdens.....God cant make enough Falcons for everyone... |
|||
Top | |
lil_lincoln |
|
|||
|
bad connection on to negative wire... id say a bad connection to one of the wires
_________________ |
|||
Top | |
Krytox |
|
|||
|
cut the white wire.
You do not need it, with it connected the blacklight will flash on and off fast and slow. its getting mixed dimming signals.
_________________ Carefree, we may not be number one, but we're up there. |
|||
Top | |
TruBlu |
|
|||
|
The white wire as in pin 5?
_________________ I understand why people drive holdens.....God cant make enough Falcons for everyone... |
|||
Top | |
synaps |
|
|||
|
TruBlu wrote: The white wire as in pin 5? Yup
_________________ I made a signature but I ated it. |
|||
Top | |
Simon L |
|
|||
|
Had the same issue when I installed my trip comp....the doco was abit misleading regarding the white wire
_________________ 1998 EL XR8 - Opt 20, Explorer Manifold, Pacemaker 4000's, Sunroof, BBQ Fuel |
|||
Top | |
TruBlu |
|
|||
|
Should I hook up pin 2 from the clock? The ign power?
_________________ I understand why people drive holdens.....God cant make enough Falcons for everyone... |
|||
Top | |
Krytox |
|
|||
|
TruBlu wrote: Should I hook up pin 2 from the clock? The ign power?
No, do not connect the Pin 2 (Red / Dark Green) Clock Ignition Power if installing a Trip Computer. The Trip computer wakes itself up with the Data wire from the Cluster.
_________________ Carefree, we may not be number one, but we're up there. |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 23 guests |