|
| SECTION25 |
|
|||
|
Hi guys, I have an EF S2 ex-chaser, and I want to improve the handling.
Can anyone tell me what I can expect this car to have, over standard XR8 and over a standard model falcon? Also, what are the best modifications for improving the handling on these models? Cheers
_________________ Wanted - boot floor and lining for sedan - cheap - Syd-Central Coast |
|||
| Top | |
|||
| ELGT |
|
|||
|
There is no difference mate, just plain old XR suspension.
Search suspension, there is shed loads of topics on what to do. |
|||
| Top | |
|||
| znipa-x |
|
|||
|
I have the same car, I went for king SLs in the front, EHDSL in the rear, with Ultima shocks (they are shorter) ride is perfect, no bottoming on the stops etc even with a fully loaded trailer and boot, although I have to watch out for speed bumps and wallows in hte road now, I also put a set of the aftermarket nolathane bushed rear control arms in to take out walking feeling they get, and replaced the camber kit they already have with a nolathane bushed version.
_________________ former FORD V8 owner |
|||
| Top | |
|||
| SECTION25 |
|
|||
|
Sounds good mate, did it improve the handling drastically?
_________________ Wanted - boot floor and lining for sedan - cheap - Syd-Central Coast |
|||
| Top | |
|||
| Waggin |
|
|||
|
If you've still got the original OPT20 suspension in there I wouldn't be surprised if it handled like a bucket of s**t- the suspension would be over 10 years old by now
King springs are always great and can be picked up for a good price. Ultima shocks are great value, or if you're looking to spend a little more you can't go past Koni
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [{DESCRIPTION}] |
|||
| Top | |
|||
| znipa-x |
|
|||
|
damn straight, it improved it stacks, it used to handle like a boat, now it's tighter/sharper than I ever remember it being, looks tougher, yet is still practical, I did a bit of looking around before settling on the combo, and reckon I got reasonable bang (or is that less bounce) for my buck.
_________________ former FORD V8 owner |
|||
| Top | |
|||
| SECTION25 |
|
|||
|
Sounds good guys, what should be my first mod?
After checking out the state of my current suspension that is =)
_________________ Wanted - boot floor and lining for sedan - cheap - Syd-Central Coast |
|||
| Top | |
|||
| znipa-x |
|
|||
|
{USERNAME} wrote: Sounds good guys, what should be my first mod?
After checking out the state of my current suspension that is =) replace the the shocks and springs, do the upper and lower rear control arms while your at it, wouldn't hurt to have a look at the front end bushes as well, I kept the the rubber bushings on all compression areas (top and bottom of shocks etc) and nolathane/polyurethane on the the other areas. worked a treat.
_________________ former FORD V8 owner |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 61 guests |
