|
| grub73 |
|
|||
|
will speak to the dude that did the work tomorrow
_________________ EF XR6 5spd 14.57@97mph |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
compressed AU gasket is around the 19 to 21 thou mark.
min P/H clearance you should consider running is 35thou. heat expansion and piston rock at TDC can cause the piston and head to touch. |
||
| Top | |
||
| grub73 |
|
|||
|
Ok dyno results are in, 154 rwkts with afr around 12.8. A bit dissapionted but having only spent $1800 I suppose I can't comlpain. Have spoken with the guy that did the head and machine work, has said that 20 thou piston to head is fine, also said that comp is around 10.5:1. The next thing is to try and get the afr right and try to find a chip at the right price. might play around with the spare manifold, throttle body and injectors.
_________________ EF XR6 5spd 14.57@97mph |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
grub73 wrote: Ok dyno results are in, 154 rwkts with afr around 12.8. A bit dissapionted but having only spent $1800 I suppose I can't comlpain. Have spoken with the guy that did the head and machine work, has said that 20 thou piston to head is fine, also said that comp is around 10.5:1. The next thing is to try and get the afr right and try to find a chip at the right price. might play around with the spare manifold, throttle body and injectors.
you need a new machinist. 20 thou is not ok |
||
| Top | |
||
| 66 coupe |
|
||
|
what about piston to valve?
the valves start opening before the piston reaches TDC, an aftermarket cams make this worse.... |
||
| Top | |
||
| grub73 |
|
|||
|
Ok, I had a big chat to the guy who did the machine work face to ace today at a Bathurst day BBQ.(GO FORD!) Deck height is 15 thou. MY BAD!!!!
 I mis understood what he told me the other day. He was saying that 20 thou gasket was fine, I didn't measure deck height ,it just looked like the piston was level with the block,(15 thou not easy to see by eye)  I know better now, Thanks guys for all the advice and concern. I feel like a right knob for the misunderstanding. LOL at me
_________________ EF XR6 5spd 14.57@97mph |
|||
| Top | |
|||
| grub73 |
|
|||
|
66 coupe wrote: what about piston to valve?
the valves start opening before the piston reaches TDC, an aftermarket cams make this worse.... Still unsure of piston to valve, didn't measure anything, my mate who did the head & stuff did all of that, then gave me the parts and i just put the big lego set together. Used a new timing set and havn't had any problems with timing chain noise at all, just noisy HLA's which i have been told can be normal with a reground cam.
_________________ EF XR6 5spd 14.57@97mph |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
grub73 wrote: Ok, I had a big chat to the guy who did the machine work face to ace today at a Bathurst day BBQ.(GO FORD!) Deck height is 15 thou. MY BAD!!!!
I mis understood what he told me the other day. He was saying that 20 thou gasket was fine, I didn't measure deck height ,it just looked like the piston was level with the block,(15 thou not easy to see by eye) I know better now, Thanks guys for all the advice and concern. I feel like a right knob for the misunderstanding. LOL at me no need to feel like a knob. better off asking and finding out the answer, then not asking and finding out the hard way. BTW sorry if i came across like rude prick |
||
| Top | |
||
| grub73 |
|
|||
|
Nah man you're right, very thankful for the advice, I'm a motor trimmer not a mechanic so advice is always good. I was once told that the only stupid question, is the one you don't ask.
_________________ EF XR6 5spd 14.57@97mph |
|||
| Top | |
|||
| Slick |
|
|||
|
That stupid question at times end up as the most important question! lol
If you're not sure, then ask. you'll probably get flamed for asking a silly question but at the end, you'll have your answer! lol
_________________ Mind f**k!!! it works on feeble minded ignorant sheeples... there's plenty of em on this site... some are very intelligent but by god they are so thick!!! Pakrat wrote: You can buy them seppertly
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 91 guests |
