|
burkes_22 |
|
||
|
hey all, i have a 98 falcon and am trying to install a alpine head unit and cant work out the constant 12V wire (straight from the battery). the list of wire colours in the tech department aren't the same as my stereo, even with a multi meter i still couldnt figure out which wire it is. can any one help me please?
_________________ Only a rat can win a rat race |
||
Top | |
Krytox |
|
|||
|
Backup (constant power) +12v = Dark Green / Yellow
Switched Power +12v = Dark Blue / White Ground = Black wire with tab. Your after market stereo won't share the same colors, but will run along the lines of red switched, yellow constant etc.
_________________ Carefree, we may not be number one, but we're up there. |
|||
Top | |
burkes_22 |
|
||
|
sorry i didn't really explain very well, the standard wires that are there are different from the colours stated in the sound system info post in the tech documents section, except for the second plug with the rear speakers on it, they are the same.
the colours in this list are not the same as the colours going into the original tape player in my car Wiring for Low and Mid Series Decks Main Wiring Plug - 12 Pins Pin 1 Grey / Dark Green Positive (+) Speaker Line for the Right hand side Front speakers (Drivers Side) Pin 2 Blue / Light Green Positive (+) Speaker Line for the Left hand side Front speakers (Passenger Side) Pin 3 Brown Button Backlighting (Park Lamps power) Pin 4 Dark Green / Yellow Constant Battery Voltage (+ Positive power) Pin 5 Dark Blue / White Accessories Power (As taken from the Ignition switch) Pin 6 Light Green Telephone Mute (Factory Telephone System) Pin 7 Red / Dark Blue Power Antenna Output (Positive Trigger) Used to extend the power antenna Pin 8 Dark Blue / Red Instrument Cluster LCD Backlight and Dimming Signal (Negative) Pin 9 < !-space-> < !-space-> Pin 10 < !-space-> < !-space-> Pin 11 Blue / Black Negative (-) Speaker line for the right hand side Front speaker Pin 12 Grey / Black Negative (-) Speaker line for the Left hand side Front Speaker Secondary Wiring Plug - 8 Pins (Rear Speakers) Pin 1 < !-space-> Pin 2 < !-space-> < !-space-> Pin 3 Pink / Dark Green Positive (+) Speaker Output for the Rear Left Hand (Passenger) Side Speaker Pin 4 Pink / Black Negative (-) Speaker Output for the Rear Left Hand (Passenger) Side Speaker Pin 5 < !-space-> < !-space-> Pin 6 Dark Blue / Red Positive (+) Speaker Output for the Rear Right Hand (Drivers) Side Speaker Pin 7 Dark Blue / Black Negative (-) Speaker Output for the Rear Right Hand (Drivers) Side Speaker Pin 8 < !-space-> < !-space->
_________________ Only a rat can win a rat race |
||
Top | |
outlawxr6 |
|
|||
|
Was the deck that you removed the original unit or an aftermarket one?
If it was the original one then providing you haven't blown a fuse the wiring you want will be in the plug make sure that you use a good ground when testing...
_________________ Do it once, Do it right!!!!!! |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 30 guests |