Fordmods Logo

AUII V8 stats inquiry 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: AUII V8 stats inquiry
Posted: Tue Oct 09, 2007 11:01 pm 
Stock as a Rock
Offline

Age: 39

Posts: 107

Joined: 7th Dec 2004

Gallery: 1 images

Location: Melbourne
VIC, Australia

hey all

I have a 2000 AUII Fairmont Ghia V8 and i just did a major service on it. i did everything...from the transmission service to the spark plugs. now i put iridium spark plugs in there for a better and longer lasting spark. now im putting in my stainless steel herrod exhaust system and a set of AUII xr8 extractors for better airflow.

Now my car dyno at 127.8 rwkw before i bought it. im aiming for aorund 150 rwkw.

Do you guys think i can get close to it was the exhaust system and the extractors????

i also put a K&N panel filter on it and cleaned the throttle body for better response.

also...what else should i do to it so i can aim for the 150-160 rwkw mark???

 

_________________

JETEA - ROARN8 - AUII Fairmont Ghia, V8, leather, sunroof, SAT NAV etc. 175KW

Top
 Profile  
 
 
Posted: Wed Oct 10, 2007 12:00 am 
Getting Side Ways
Offline
User avatar

Age: 46

Posts: 1887

Joined: 26th Nov 2006

Gallery: 7 images

Ride: EL XR8, '08 Mondeo XR5t

Power: 205 rwkw

Location: Perth
WA, Australia

You'll probably find you'll make your 150 with those mods. Chuck in a set of BPT underdrives as well and get yourself a tweecer or switch chip tune and you'll be well over 150.

 

_________________

Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20

When injustice becomes law, resistance becomes duty

Top
 Profile  
 
 
Posted: Wed Oct 10, 2007 12:07 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 2116

Joined: 13th Aug 2005

Gallery: 15 images

Ride: 1999 XHII XR8, 2002 AU Fairmont

Power: 236 rwkw

Location: Perth
WA, Australia

Cant actually fit the underdrives to AU's, they are basically as underdriven as you wanna go as std.
TwEECer also isnt an option on the AU's, i'm pretty sure, someone may correct me if im wrong.

You should see a nice gain with the AU XR8 extractors and herrod system but i would have went for Pacemakers, hurricanes, difillipos etc instead, to get that little bit more.

Next you'd probly wanna go some sort of cold air intake to get some better airflow in to go with the better airflow out.

Then a flash tune should really set it all off and i have no doubt it will take you over 150rwkw.

AFAIK the biggest killer of those AU's is the std camshaft.

 

_________________

STREETBUILT RACING
1999 XHII Falcon XR8 Ute 5.0L, TKO600 5spd, KB 2.1L Blower, 6.5psi, 12.2@113mph!!

Top
 Profile  
 
 
Posted: Wed Oct 10, 2007 12:11 am 
Getting Side Ways
Offline
User avatar

Age: 46

Posts: 1887

Joined: 26th Nov 2006

Gallery: 7 images

Ride: EL XR8, '08 Mondeo XR5t

Power: 205 rwkw

Location: Perth
WA, Australia

haha... ignorance is bliss! I meant flash tune :P

 

_________________

Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20

When injustice becomes law, resistance becomes duty

Top
 Profile  
 
 
Posted: Wed Oct 10, 2007 8:35 am 
Stock as a Rock
Offline

Age: 39

Posts: 107

Joined: 7th Dec 2004

Gallery: 1 images

Location: Melbourne
VIC, Australia

yeah...thanks for the tips boys....i want to maybe do something internally to the motor so getting some bigger gains without spending to much money....like cam or injectors or bigger throttle body...

not sure which one yet...most likely ill get the flash tune so i can bump it up to around 160-170 rwkw....that would be heaps for me...

also...what is the best mod to improve take off and launch off the line....without changing the diff ratio?????

cheers

 

_________________

JETEA - ROARN8 - AUII Fairmont Ghia, V8, leather, sunroof, SAT NAV etc. 175KW

Top
 Profile  
 
 
Posted: Wed Oct 10, 2007 9:23 am 
Tyre Shredder
Offline

Posts: 311

Joined: 3rd Jan 2006

Location: tauranga
New Zealand

as said head work and cam is what makes them come alive.....you could fit a tickford intake snorkel and high flow filter ...relatively cheap

i have the same car and IMO you want to work to torque down low....not upper end....tri y headers would be better

mines puttin out 524nm of torque and the motor hasnt been out of the car so theyre really detuned in stock form......wait till you see the stock exhaust sittin on the ground youll see what i mean :lol: :lol:
Top
 Profile  
 
 
Posted: Wed Oct 10, 2007 9:37 am 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1079

Joined: 19th May 2005

Gallery: 29 images

Ride: ELXR8 SERIES 2

Location: naracoorte
SA, Australia

i wouldnt bother with injectors or t/body just yet, you should have the 24s and 65mm t/body already and they are a good start. cam change dont come cheap unless you can do it your self and depending on cam choice you might wana change valve springs to suit the cam so there is a bit more coin gone. if i were you id do the mods you said youve got there and prob a cappa flash tune or the likes and look at geting a bit more air into her via a bigger snorkel and you should be prety happy with the gains you will make. best bet to get her off the line would be a stally (i guess its auto) or a diff ratio change.

 

_________________

EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES

EF XR6, 5SPD, HERITAGE GREEN, AU XR6 VCT ENGINE

VL COMMODORE, 5SPD, WHITE

BA XT, AUTO, OFFSHORE BLUE

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Dec 27, 2024 10:27 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names