|
| EALCON 3.9 |
|
||
|
i have a omvl r90e gas setup but i think im missing a hose on the bottom of the converter.
if anyone has the same setup can u plz post up some pics so i can see. thanks in advance Will. |
||
| Top | |
||
| banarcus |
|
|||
|
Looks like it is the low pressure outlet to the mixer and the coolant line. |
|||
| Top | |
|||
| Bug |
|
|||
|
Well im not exactly familar with that mixer.. Your coolant send and return lines appear to be fine, and I can see the high pressure line of course. The only thing I can think that would be missing is the balance line..
Got a pic from another angle? I cant see the low pressure line either
_________________ EL XR6 5spd |
|||
| Top | |
|||
| dddp! |
|
|||
|
is that the same unit used on the dreamsystems?
on mine the hose curving up from the bottom towards the front than going up and towards the rear is the low pressure hose - the bottom coolant hos is in the same position where that hose with the spiral wire wrapped around around it is under the unit |
|||
| Top | |
|||
| Maco |
|
||
|
Your not missing anything. It is set correctly. In and out for coolant, balance line n back and one gas out let. The OMVl convertor come with two outlet holes for ease of installation. Only need to use one, just as it's been setup.
_________________ A goooli gooo goo |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 16 guests |
