|
| andrich |
|
||
|
hi,
just wondering,would it be worth while upgrading my exhaust system to a dual 2 1/2 inch system over what i have now, which i beleive is around 2inch dual. i got quoted 650 for a dual 2.5 inch system, new mufflers and chrome tips all fitted, but not mendrel bent. the guy recons it only matters about getting mendrel bent if ya making big power, but i think either way its definately better with menrel bent.am i right? cheers Oh year its on a 351 straight gas
_________________ BA XR6 Turbo, Blueprint, 18's, Premium Sound, Leather. |
||
| Top | |
||
| Disco Frank |
|
|||
|
mandrel bent will ALWAYS be better period the guy is full of s**t and poo poo
press bends will restrict the gas flow and cause to much backpressure, s*** in power loss go somewhere else
_________________ RIP SCOTT |
|||
| Top | |
|||
| andrich |
|
||
|
thats exactly what i said and thought, il look around and have a loot, one place wanted 1750 for a dual pipes, from extractors back, pfft, what should it cost for a 2 1/2 inch dual system mendrel bent?
_________________ BA XR6 Turbo, Blueprint, 18's, Premium Sound, Leather. |
||
| Top | |
||
| RedRoo |
|
|||
Age: 55 Posts: 1883 Joined: 22nd Apr 2005 Ride: 94 ED Fairmont, MY97 LE WRX Location: Seymour |
have a look on e-bay you see some 2.5" systems on there at a reasonable price
|
|||
| Top | |
|||
| MilleniumFalcon |
|
|||
|
I was quoted from my local exhaust place, I think most are roughly the same, $750 twin 2½ mandrel bent from the catback, but its for a BA, so yours should be around that sort of figure I'd imagine.
But defo as RedRoo said, look on ebay, some great bargains on there, also for extractors too. Exhaust places normally charge about $1200 for some decent extractors, but you can usually get similiar setups on ebay for $700-800. |
|||
| Top | |
|||
| andrich |
|
||
|
{USERNAME} wrote: I was quoted from my local exhaust place, I think most are roughly the same, $750 twin 2½ mandrel bent from the catback, but its for a BA, so yours should be around that sort of figure I'd imagine.
But defo as RedRoo said, look on ebay, some great bargains on there, also for extractors too. Exhaust places normally charge about $1200 for some decent extractors, but you can usually get similiar setups on ebay for $700-800. orite yeah thats roughly what i thought it'd cost. Iv got good extractors but i know what ya mean ebays a great source, but il have a look for a set of pipes on their, cheers guys
_________________ BA XR6 Turbo, Blueprint, 18's, Premium Sound, Leather. |
||
| Top | |
||
| NUTZEF |
|
||
|
a 2 1/2 inch press bend will flow more than a 2 inch mandrel so if yours is a 2 inch press bend then a 2 1/2 press bend would be a good upgrade. mandrel i think is about 5% better flowing and a lot more expensive but if u have the money why not.
_________________ WOLF V500, t66(ar70 compressor), rochester 550cc injectors, borgg 265l fuel pump, 48mm turbosmart gate, turbosmart plumb back bov, 600x300x100 cooler, 3 inch zorst , 3.45 lsd, xr6 head, wade 1604 cam, adjustable cam gear, K&N pod filter, on 10psi and manual convertion exedy button clutch. 285.6rwkw |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 13 guests |
