|
| richie |
|
||
|
Have a 12/89 EA auto 3.9 with Throttle Body injection.
When you start it will not idle unless give bit of throttle. Changed power steer sensor - no change. Swapped the TPS's over - - no change. Disconnected wiring to MAP - IT IDLES OK. Does this make sense? What is effect of MAP electrically disconnected? Any thoughts? Richie.
_________________ 1993 ED F/mont 5.0L, Auto, Edelbrock RPM's, CompCam XE276HR, Crane Gold Race 1.7's, Edelbrock Performer, 75mm T/B, MAP, 42lb , GenIII coils, PH4000's , Twin 2.5", Thermos & underspeeds, 3.7 LSD, 2800 stall and MoTec M800, 372fwhp @ 5400rpm & 387 ft-lb @ 4400 rpm. |
||
| Top | |
||
| EALCON 3.9 |
|
||
|
if ur MAP is disconnected then the car will run but blow black smoke. sounds to me like its crapped itself.
|
||
| Top | |
||
| neddy |
|
|||
|
Yep, try MAP sensor.
_________________ In hope we believe... but in God we trust... |
|||
| Top | |
|||
| richie |
|
||
|
Yep, found how to check codes on this thing & got #22 - MAP out of range.
Stuck new one in today (worth more than the car) - all goes great. Thanx. Richie.
_________________ 1993 ED F/mont 5.0L, Auto, Edelbrock RPM's, CompCam XE276HR, Crane Gold Race 1.7's, Edelbrock Performer, 75mm T/B, MAP, 42lb , GenIII coils, PH4000's , Twin 2.5", Thermos & underspeeds, 3.7 LSD, 2800 stall and MoTec M800, 372fwhp @ 5400rpm & 387 ft-lb @ 4400 rpm. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 127 guests |
