|
| mr_rx7_ |
|
||
Age: 38 Posts: 347 Joined: 10th Jan 2005 Ride: 2002 Mustang Cobra Location: Broadmeadows (Melb. North) |
I have the torx bit needed but the bolts have the little stub in the middle of the torx pattern, and my torx bit isnt hollow to compensate.. How do I get these bolts off?
_________________ Red 2002 Mustang Cobra |
||
| Top | |
||
| alfy |
|
|||
|
i just used a pair of pliers lol, took ages though
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| Shum's EL |
|
|||
|
you can get the torx bits with hollow centres..
|
|||
| Top | |
|||
| phongus |
|
|||
|
go to supercrap or something and buy a set of the security torx. I bought crappy ones for like 10 bucks and they have lasted me for 2 years.
phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| mr_rx7_ |
|
||
Age: 38 Posts: 347 Joined: 10th Jan 2005 Ride: 2002 Mustang Cobra Location: Broadmeadows (Melb. North) |
Phongus are they the allen key style ones? I just got them now and F**k the bolts are real hard to undo.. seems like they are getting scraped. Any lil tricks?
_________________ Red 2002 Mustang Cobra |
||
| Top | |
||
| smiley235 |
|
|||
|
I got the torx screw from repco with the little hole in the centre. Came out easily. Make sure you have the right one.
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| Damo |
|
|||
|
if you get stuck just drill them out, or file a slot in them and use a flat blade screwdriver.
|
|||
| Top | |
|||
| outlawxr6 |
|
|||
|
It is the age old adage, use the right tools for the right job....
Get the torx bit that fits, I got mine from Tandy's $20 for a full set of varying types of security bits....
_________________ Do it once, Do it right!!!!!! |
|||
| Top | |
|||
| twr7cx |
|
|||
|
Most auto stores or hardware stores sell the torx bits sets for about $20.00.
|
|||
| Top | |
|||
| twase |
|
|||
|
9 years ago when they were not common I found that the centre pin will break off if you bend it until it fatigues then use a normal torx bit.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| MooseMan |
|
|||
|
small flathead screw driver.
_________________
|
|||
| Top | |
|||
| mr_rx7_ |
|
||
Age: 38 Posts: 347 Joined: 10th Jan 2005 Ride: 2002 Mustang Cobra Location: Broadmeadows (Melb. North) |
Finally got em out lol. Used pliers haha! Thnx alfy! thanks for all the replies guys..
now onto another problem.. needa get a mounting bracket of some kind. I took the ones off the stocko headunit and tried them but the thing wont fit into the slot with them. Can I go down to strathfield and the like and get them to make a bracket and mount it up? I did all the wiring up myself and the thing works real good~
_________________ Red 2002 Mustang Cobra |
||
| Top | |
||
| twase |
|
|||
|
A two din mounting bracket may work even with the single din facia.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 25 guests |
