Have to get rid of a few things otherwise down the tip they go.....

EF Fairmont single spinner diff. Has basically brand new discs and pads only on car for roughly a month before diff came out, calipers were replaced from a wrecker. $100 ONO(Pic Below)

XF Headlights, both have genuine unscratched lenses. $50 ONO.

XD-XE Drivers side mirror. Black, manual. Mirror glass good cond.$10.

Starter motor from a 250 Crossflow that was in an 83ish LTD.$20 ONO.

Perry Extractors to suit Cast Heads. Was taken out of an XD something, and then found out they didnt fit alloy heads. So im guessing, cortina's as well.They are also tuned length pipes as well from what i can see.....they all look same length, unlike the ones in my XE currently. $80 ONO.

Weber carby....82 da on tag...taken from 200 crossflow. Replaced only due to being given a recently jetted carby.$20 ONO

Pair of XF Taillights. Grey surrounds. All looks to be in good order, surround itself though is missing 2 tiny bolts on each light.$40 ONO.

Pair rear springs taken from my XE. They are standard height, but too low for me. $20.

Still have Series 2 Fairmont door trims with F badge on front 2. Rear are suited to power windows. Rear Right has black scuff marks on arm rest, but should clean off with something other than water.$160ono.

Rear 1\4 window venetians. Taken from 85ish LTD. They are vertical, not horizontal. Colour is silver. Two bottom clips appear to be good. Taken from 85ish LTD.$80 ONO.

Please ask specifically which item\s you may be intrested in and I shall pm you with a photo\s.

Pick up Keilor if easier, otherwise post.

 

 

Attachments:

diff.jpg [ 61.08 KiB | Viewed 143 times ]

Last edited by hellbent_ef on Tue Oct 30, 2007 1:29 pm, edited 2 times in total.

Pair rear springs taken from my XE. They are standard height, but too low for me. $20.

I'm interested in them......Are they standard springs cut down or are they proper lowered springs?

neither, they are standard, as it says. But i wanted the car higher, so standard springs are to low for me.

I was told that XE-XF rear springs will fit the E Series??? If so then how much would postage be to Vic 3909?

it should come to about $13.55 if i got the weight right.

That sounds good. Would you be able to PM or email me a pics of the springs?
revcore30@hotmail.com

first post now has rear 1\4 venetians.