|
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
just doing some research for a customer.
he's looking for more power out his EB XR8 5 speed he said he has a 70mm TB just wonder if the is a 70mm MAF that will bolt on? and what cam do you guys recomend? and any computer mods if needed? |
||
| Top | |
||
| MrLandau |
|
|||
|
If he is running a 70mm throttle body - a Pro-M 70mm, Bullet 75mm or C&L73mm can be used. I would try to stay between 5-10mm larger on the air flow meter so the throttle body is the intake manifold restriction - not the flow meter.
For cams, the Crane 2030 and 2031 are well know for making power - and is certainly tried and tested amongst us Australians. The Trick flow stage 1 cam isn't a bad item and the Competition cams XE266HR and XE274HR are pretty good as well. Shane
_________________ Weapons of choice |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
{USERNAME} wrote: If he is running a 70mm throttle body - a Pro-M 70mm, Bullet 75mm or C&L73mm can be used. I would try to stay between 5-10mm larger on the air flow meter so the throttle body is the intake manifold restriction - not the flow meter.
For cams, the Crane 2030 and 2031 are well know for making power - and is certainly tried and tested amongst us Australians. The Trick flow stage 1 cam isn't a bad item and the Competition cams XE266HR and XE274HR are pretty good as well. Shane will these cams run with the standard ECU? |
||
| Top | |
||
| EDXR8 |
|
|||
|
{USERNAME} wrote: will these cams run with the standard ECU?
Yeah they are all designed for the stock EEC although some people have problems. The EB/ED EECs adapt pretty well I have found. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
