|
| ed_fairmont_turbo |
|
||
|
Does anyone know if spool conrods are any good and how much power they can handle, im after 600hp
_________________ ED Fairmont: Master Power GT45, race spec T5, Wolf v4, 870cc Injectors, EF bottom end, EF Head, Surcam custom Grind Cam, Crane LX92 Coil |
||
| Top | |
||
| Dansedgli |
|
||
|
They should be alright considering standard rods would nearly be alright.
I beleive Kyle (6BOOST) has had testing done on these rods and found them to be pretty good. He recommends them to people quite often on calaisturbo. There is a bloke on XR6T forums who's brother sells the rods and he is using them in a really big HP build so he must be confident in the product. |
||
| Top | |
||
| EBXR8380 |
|
|||
|
Comparing them to std rods ?? They should be up to the task...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| ed_fairmont_turbo |
|
||
|
Hope so cause i just bought some
_________________ ED Fairmont: Master Power GT45, race spec T5, Wolf v4, 870cc Injectors, EF bottom end, EF Head, Surcam custom Grind Cam, Crane LX92 Coil |
||
| Top | |
||
| phase3ute |
|
||
|
I have some in my BA XR6 turbo at the moment, im running 360+rwkw and chasing 400-420rwkw. they seem to be good for now, comparing the 2 when i had the engine apart the standard were like tooth picks compared to h beam rods. I would be surprised if they didnt hold up to 1000hp
_________________ 11.1@127mph 360rwkw WOG edited, more to come |
||
| Top | |
||
| blowy87 |
|
||
|
do they fit older sohc engines?
_________________ ford 6cyl turbo. |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
{USERNAME} wrote: do they fit older sohc engines?
if you use the right piston they will |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 37 guests |
