|
ISQUIK |
|
|||
|
sorry guys i f**k up i ment to add on a filter.
cause im running both straight to a vented catch can. i think ill buy a tig welder and start making all this kind of s**t and sell it. piss easy to make.
_________________ wish i had bigger wheels. |
|||
Top | |
kev87 |
|
|||
|
pity its illeagal hey. evrything sort of ozone depleting gas needs to b recirculated and converted to a more ozone safe gas. eg thru the cat.
i was asking for the other way that is recircualted for compliancing lol |
|||
Top | |
ebs_4l |
|
||
|
the epa friendly way is to use not just a basic catch can, but whats called an oil/air seperator... they are similar, but an oil seperator collects the oil from the vapour and it drains back to the sump
_________________ EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI |
||
Top | |
twr7cx |
|
|||
|
On mine I've got a mini breather filter on the rear rocker cover breather.
Then the PCV runs to a sealed baffled catch can and the catch can then runs to the original PCV connection on the bottom half of the BBM. I figure this should be alrigth as obvosly since the rear rocker cover has the breather filter on it it can breathe in and out as much as it likes and no boost will go into it. The catch can stops the oil going into my intake manifold and the PCV stops booost from going into the rocker cover. As for EPA and road worthy - not an issue down here. |
|||
Top | |
kev87 |
|
|||
|
twr7cx, see u still cant have that 'leagally' for compliancing. must b fully plumbed back. its the same as an external wastegate screamer, must b plumbed back into a cat to reduce emissions
|
|||
Top | |
twr7cx |
|
|||
|
{USERNAME} wrote: twr7cx, see u still cant have that 'leagally' for compliancing. must b fully plumbed back. its the same as an external wastegate screamer, must b plumbed back into a cat to reduce emissions
Compliance is just not an issue down here at all. As for the wastegate not a drama either for my blower. I relise my set up doesn't help you out at all but. |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 29 guests |