|
|
||
|
||
| XP Choptop |
|
||||
|
I'm going to be running a V8 on straight LPG in my XP convertible. My biggest question is which motor? I have ruled out the 351 Cleveland as it is too much of a hassle to make it fit and rego etc.
I was going to go with either a 289 or 302 old school but then someone said "why not get a 90's 302w EFI and rip off the injection and run the carby instead". My LPG mechanic (who I trust alot) said that a carby set up would be better with the LPG than the EFI. I've been looking at both motors (seems cheaper to buy a whole car with everything in it than each part individually) and just recently read that the older blocks are built stronger (I think thats what they were saying). So what to do? Should I try to find a good 'old school' 289/302 or 351w OR is it worth while going the 302 EFI and changing it back to the carby set up? Any suggestions would be valued. I just looked at a 302c (76DA9425EA - 14F8) which has been built up to a 351. Its currently running straight gas and has the C4 driving it. I am currently running a 200ci on LPG (the LPG has been set up so the V8 can slot straight in). Neil
|
||||
| Top | |
||||
| Andrew J |
|
|||
|
Make it dedicated gas, its a much nicerr system, and more power to boot! Id go with a later model efi, put on an old school manifold, and a GRA throttle body. Im sure GRA now do throttle bodies that look simialr to carbies.
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
|
|||
| Top | |
|||
| Jim Beam |
|
|||
Age: 35 Posts: 3505 Joined: 1st May 2005 Ride: EB Fairmont Location: Northern Suburbs, Adelaide |
393 Cleveland putting out 500 horsepower.
_________________ Doin it for Scotty. |
|||
| Top | |
|||
| sexyr6 |
|
|||
|
put a 4.0L in it...
|
|||
| Top | |
|||
| XP Choptop |
|
||
|
Yeah, had that idea thrown at me too. Did think about it at one stage but I'm a sucker for the grumble of 8 cylinders.
Must say though, I think the EB/ED was the best looking Falcon produced. Use to have one and it sat pretty! |
||
| Top | |
||
| MadMatt |
|
|||
|
An unleaded motor starts off with hardened valves and so on. How about F series truck, didnt they have a 5.8w?
_________________ Member Number 8804 |
|||
| Top | |
|||
| XR8KID |
|
||
|
I got an xr stn wgn with twin exhaust system she rumbles like an 8 but if it's power as well i'd keep an eye out for an old 302w. Nice car!
_________________ FALCONOATH |
||
| Top | |
||
| XP Choptop |
|
||
|
Well I have finally got the motor. Its a 92 Windsor 302 with C4 from an NC Fairlane.
Now I am going about converting it from EFI to carby. I'll let you know how it goes. |
||
| Top | |
||
| BuNtEr |
|
||
|
put in a 220kw AU 302 now that would be nice under the bonnet
_________________ BANNED |
||
| Top | |
||
| BuNtEr |
|
||
|
{USERNAME} wrote: Well I have finally got the motor. Its a 92 Windsor 302 with C4 from an NC Fairlane.
Now I am going about converting it from EFI to carby. I'll let you know how it goes. keep it efi much cleaner look under the hood
_________________ BANNED |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 15 guests |
