I HAVE AN ETON TWIN SCREW OFF A JAG 4.0L V8 HAVING TROUBLE FINDING A GOOD PLACE TO MOUNT IT WITH OUT REBUILDING THE ENTIRE FRONT END. CAN ANYONE OR HAS ANYONE MOUNTED A LARGE TWIN SCREW WITHOUT TO MANY MODS.

Use the search button....there has been a thread on this before with some useful info.

XFpaul i think is his user name has a M90 on his NC 4.0l fairlane
he mounted his on top of the EA-ED intake manifold, if you wish to use it you will have to mount in over the exhaust side which is probably do able but most likely have to relocate the Power steering pump. You could also convert back to the Log manifold or Build a custom intake...

Good luck with doing it cause there is alot of mucking around as you will have to make brackets, run piping, Fuel System adjustments and everything else.
Let alone getting the right tension on the belt so it wont slip.

THANKS MMD. IKNEW I WOULD HAVE TO MAKE SOME BRACKETS AND MODIFY SOME, THE LINKS AND CONTACTS WILL HELP HEAPS. WILL POST PICS OF INSTALL SO THAT ANYONE ELSE WHO WANTS TO INSTALL A LARGE TWIN SCREW WILL FIND IT EASIER. THIS IS NOT GOING TO BE AN EASY JOB BUT DOABLE. SHOULD RUN NICE. THANKS AGAIN.

Mate just a little tip. Please turn your CAPS OFF!