come into some decent money, really wanna spend some on it and be happy with it at least till im off my p'z n have a monster lol, its got tint n stuff needs to be lowered but im looking more at engine mods, it needs power and im wondering if a capa kit for 9k all up in the end once its fitted is worth doin instead of spendin nearly the same turboing it to run 10-12psi?(200-250rwkw)...i know diff and transwill need work too so post focus is engine mods to pull 13'z!!!

trade it for an XR6t then start from there? Will be a lot cheaper in the long run an probably less painful

Agree..... settle for low/flat 14's in N/A..... or save for an XR6T

If you keep it N/A read this article for some ideas

http://www.autospeed.com/cms/A_2319/article.html

..... then chuck in some 4.11 diff gears and a high stall

why is that always the first thing that comes to mind, like its so simple to sell a car in the first place to make enough money on it to be able to upgrade! And then i come to forced induction forum to be told i should work it n/a lmao i know theres alot of posts on a turbo xt conversion, but now alot of cars have been done so i was hoping for some logical replies on basic goods needed for turbo setup,etc . makin my xt run 13'z isnt a big ask and im sure that could even be achieved running the limited 10psi? (if im correct on that)
..im off the p'z in about 8 months so that is wen ill be lookin at gettin my a** in the seat of an fpv!

should piss it in on 10psi my xt is on 10psi and makes 270rwkw at 4000rpm (runs out of fuel after that lol)

Speak to Geoff at Snort he's got kits for these that start from $3k this also depends on what add on that you want as the total cost.

He has a BA XT 3V thats got a remote mounted set up with no intercooler on 9 psi that pulled 320-330rwkw & on the 1/4 it ran 11.77sec check his web site

Joe

Speak to Geoff at Snort he's got kits for these that start from $3k this also depends on what add on that you want as the total cost.

He has a BA XT 3V thats got a remote mounted set up with no intercooler on 9 psi that pulled 320-330rwkw & on the 1/4 it ran 11.77sec check his web site

Joe

sorry about the double post