|
| EL Mad |
|
||
|
hey guys, does anyone know where i can order the silver front bar mesh (same as bf gtp) for my xr8 ute. names of websites would be great.. thanks
_________________ I'm a Ford freak
|
||
| Top | |
||
| Gregg_13 |
|
|||
|
go for Mr Mesh on Ebay or mrmeshman or similar. He does em all. You can get it through www.awcinfo.com as well
_________________ nascentes morimur |
|||
| Top | |
|||
| Munch |
|
|||
|
mate, them things are expensive as ($500^^) and you need a GT to buy them!!!! and they don't fit straight across, require a bit of handy work...
Jet ute gets them I think, You should PM him.
_________________ mmmmmmmmmunchy! |
|||
| Top | |
|||
| Gregg_13 |
|
|||
|
I think hes just after the lower grill mesh, not necesarily the "GT" mesh.
_________________ nascentes morimur |
|||
| Top | |
|||
| EL Mad |
|
||
|
yer the lower grill mesh, but dont rate the blak stuff. wouldnt mind silver. we have a bf gtp so can order thru tht. 500, wasnt expectn tht
_________________ I'm a Ford freak
|
||
| Top | |
||
| Gregg_13 |
|
|||
|
NAH 500 IS FOR THE gt fpv stuff from Ford
http://cgi.ebay.com.au/FORD-FALCON-BA-B ... dZViewItem
_________________ nascentes morimur |
|||
| Top | |
|||
| Munch |
|
|||
|
Yeah the bottom section is that much!!!
That ebay stuff bolts over the top of the existing grille work and restricts the airflow... Me still say Pm Jet Ute, he got a Typhoon one for my mate good price too!
_________________ mmmmmmmmmunchy! |
|||
| Top | |
|||
| Gregg_13 |
|
|||
|
only the top section bolts over the exising mesh, and its mesh, Excuse me for bluntness, But how the f**k is mesh goin to restrict airflow. if your worried get 2 deflection plates behind the grill similar to what comes with the ss induction kit. . and the lower mesh you have to screw into place, Ive got it on mine in black, there is nothing to bolt over.
Mesh = lots of holes for air, not restricting 2 tenths of f**k all
_________________ nascentes morimur |
|||
| Top | |
|||
| data_mine |
|
|||
|
If you want genuine mesh from FPV, be prepared to bleed. the GT-P (shadow chrome) mesh in the rear bar, a tiny bit, is over $700. Dunno how much either of the front bar bits would costs. More undoubtedly.
Also as above, they won't fit an XR properly anyway, the bars are difference shapes.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| Munch |
|
|||
|
Gregg_13 wrote: only the top section bolts over the exising mesh, and its mesh, Excuse me for bluntness, But how the f**k is mesh goin to restrict airflow. if your worried get 2 deflection plates behind the grill similar to what comes with the ss induction kit. . and the lower mesh you have to screw into place, Ive got it on mine in black, there is nothing to bolt over.
Mesh = lots of holes for air, not restricting 2 tenths of f**k all my bad about the bottom. 
As for the top, I think you're bluntness is your downfall. The aftermarket grille bolts over the top, in which the slotted spacings are alligned differently to the standard slottings in the grille. Therefore there is a tendency for a greater restriction in the overall grille as there is a restriction for the air to pass thru... its pretty simple logic, a grille over a grille with misalligned slotted spaces reduces flow..
_________________ mmmmmmmmmunchy! |
|||
| Top | |
|||
| Gregg_13 |
|
|||
|
My bluntness was due to having a s**t day at work, but still it 2 tenths of f**k all. Get a set of deflection plates made up for behind the grill and you wont notice anything.
_________________ nascentes morimur |
|||
| Top | |
|||
| EL Mad |
|
||
|
cheers lads. got told to buy chrome mesh from a metal shop and fitted by my panel beater. can do full job for 150-200 total including mesh top and bottom. replcing the blak mesh already there
_________________ I'm a Ford freak
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 86 guests |
