Fordmods Logo

Vacuum lines?? 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: Vacuum lines??
Posted: Sun Dec 09, 2007 7:03 pm 
Smokin em up
Offline
User avatar

Age: 37

Posts: 290

Joined: 10th May 2006

Ride: 5 Spd EA Wagon, 5 spd EF Fairmon

Location: Melbourne
VIC, Australia

Hi,
Just a quick question about where people are getting the vacuum to run MAP sensors, heater controls, etc from??
Can you get vac from before the turbo?? or do you run a vac storage tank with valves to keep vac for the dash etc on boost??
Thanks
David

 

_________________

If you're not driving a manual, you are only steering...

Top
 Profile  
 
 
Posted: Sun Dec 09, 2007 8:36 pm 
Stock as a Rock
Offline

Posts: 149

Joined: 28th Sep 2007

Power: 192 rwkw

Location: kadina
SA, Australia

pretty much just leave it all as is mate
Top
 Profile  
 
 
Posted: Sun Dec 09, 2007 8:52 pm 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 975

Joined: 26th Nov 2004

Ride: el falcon

Power: 608 rwkw

Location: Waroona
WA, Australia

yeh, no need to change it. leave it as factory

 

_________________

# 1997 EL Falcon GLI - 600+rwkw

# 2008 FPV FG GTE - Xa Coilovers, 20x8/ 20x10 Fairladys

Top
 Profile  
 
 
Posted: Wed Dec 12, 2007 7:38 pm 
Smokin em up
Offline
User avatar

Age: 37

Posts: 290

Joined: 10th May 2006

Ride: 5 Spd EA Wagon, 5 spd EF Fairmon

Location: Melbourne
VIC, Australia

the MAP doesnt freak out on boost??

David.

 

_________________

If you're not driving a manual, you are only steering...

Top
 Profile  
 
 
Posted: Wed Dec 12, 2007 10:20 pm 
Getting Side Ways
Offline

Age: 40

Posts: 868

Joined: 23rd Sep 2005

Ride: eb falcon

Location: kadina
SA, Australia

only if you have a std one and std ecu

 

_________________

EB 4L, 8.4:1, R154, GT4202r, 4in exhaust, Greenslade Engineering exhaust manifold, plenum chamber, 90mm throttle, Garrett W2A cooler, Surecam custom, autronic SM4, Bosch 120lb, Crane HI-6, LX-92, LM-1, Turbosmart Reg, 2x bosch 044, turbosmart 48 gate. 470kw+ @ 18PSI

Top
 Profile  
 
 
Posted: Thu Dec 13, 2007 9:06 pm 
Smokin em up
Offline
User avatar

Age: 37

Posts: 290

Joined: 10th May 2006

Ride: 5 Spd EA Wagon, 5 spd EF Fairmon

Location: Melbourne
VIC, Australia

if you were running standard setup, would you just run a valve in the vac line??
Thanks
David

 

_________________

If you're not driving a manual, you are only steering...

Top
 Profile  
 
 
Posted: Thu Dec 13, 2007 11:18 pm 
Getting Side Ways
Offline
User avatar

Age: 71

Posts: 3555

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

yes you can.. I think there is a vacuum tank behind glovebox??
Mine works without any known issues...

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
Posted: Fri Dec 14, 2007 1:30 pm 
Stock as a Rock
Offline

Posts: 149

Joined: 28th Sep 2007

Power: 192 rwkw

Location: kadina
SA, Australia

{USERNAME} wrote:
if you were running standard setup, would you just run a valve in the vac line??
Thanks
David


wat vac line are u talking bout mate?
if u mean the map sensor line and u intend to run a standard ecu turbo setup then no just leave it as it is
Top
 Profile  
 
 
Posted: Sat Dec 15, 2007 5:44 pm 
Smokin em up
Offline
User avatar

Age: 37

Posts: 290

Joined: 10th May 2006

Ride: 5 Spd EA Wagon, 5 spd EF Fairmon

Location: Melbourne
VIC, Australia

Thanks for the info guys
Greatly appreciated.
David

 

_________________

If you're not driving a manual, you are only steering...

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 24, 2024 3:35 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names