|
| Mackagtho |
|
||
|
After replacing isc with a new one idles fine at 700rpm but when you put it in gear idles jumps to 1300rpm, also when cruising and back off rpm stay at 1300 for about 10seconds after foot taken off
with isc dinconnected idles fine and revs dont jump up when in gear car is running au 200kw bpt tuned and twEEcer, has 58mm tb still any help greatly appreciated
_________________ ED Fairmont, XR lights, AU tickford 200kw, GT-P 18's, TwEEcer, 230kw, KAAZ LSD. |
||
| Top | |
||
| mr_sperm1 |
|
|||
|
try a throttle recalibration??
_________________ Maloo - Holden's word for ugly. |
|||
| Top | |
|||
| Mackagtho |
|
||
|
more info you mean reset tps, but it ran fine with old partially blocked isc
_________________ ED Fairmont, XR lights, AU tickford 200kw, GT-P 18's, TwEEcer, 230kw, KAAZ LSD. |
||
| Top | |
||
| mr_sperm1 |
|
|||
|
yeah, the ignition on wait a minute, then foot to the floor for a minute thingy
could need your tune adjusted - wold have been tuned with the old one not fucntioning correctly and now that it has a working one, it could throw it out (i doubt it, but you never know!)
_________________ Maloo - Holden's word for ugly. |
|||
| Top | |
|||
| Mackagtho |
|
||
|
checked tps reading 0.95 volts
any other ideas?
_________________ ED Fairmont, XR lights, AU tickford 200kw, GT-P 18's, TwEEcer, 230kw, KAAZ LSD. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 24 guests |
