|
Tocchi |
|
|||
|
yep... ive done a Tech Doco (with step by step photos) on how to install it...
i know you are from Vic, but hop onto www.pertheseries.com and check it out. it only took me 30mins, and that was slow due to taking pics and s**t |
|||
Top | |
el_xr6_luke |
|
|||
Age: 38 Posts: 412 Joined: 21st Aug 2006 Ride: EL XR6, Blueprint, Turbo Location: Melbourne |
thanks for the doco, it doesnt look very hard to do at all.
Whats the ful model number of your intank pump and how much rear wheel kw do u think it will suppy easily? |
|||
Top | |
needfordspeed |
|
||
|
Sealant is to put between the manifold/turbo and manifold/head, wastegate pipe to exhaust etc etc, I was advised to do this for a better seal when installing all my stuff.
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
Top | |
el_xr6_luke |
|
|||
Age: 38 Posts: 412 Joined: 21st Aug 2006 Ride: EL XR6, Blueprint, Turbo Location: Melbourne |
so put sealant and the gaskets aswell?
|
|||
Top | |
el_xr6_luke |
|
|||
Age: 38 Posts: 412 Joined: 21st Aug 2006 Ride: EL XR6, Blueprint, Turbo Location: Melbourne |
|
|||
Top | |
needfordspeed |
|
||
|
Yup sealant and gaskets both.
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
Top | |
Tocchi |
|
|||
|
a Bosch 040 is what you look for... a Bosch 044 is the most common fuelpump for a turbo falcon....
|
|||
Top | |
el_xr6_luke |
|
|||
Age: 38 Posts: 412 Joined: 21st Aug 2006 Ride: EL XR6, Blueprint, Turbo Location: Melbourne |
{USERNAME} wrote: a Bosch 040 is what you look for... a Bosch 044 is the most common fuelpump for a turbo falcon....
lol so get a 040? or a 044? im hopeless, i need other people to tell me what has worked good for them. thanks for your help mate |
|||
Top | |
Tocchi |
|
|||
|
get a 044... its rated to more HP than a 040.
but what i meant earlier, was looking for "bosch 04#" and the results will be right |
|||
Top | |
EBXR8380 |
|
|||
|
044 are external...
My system has Walbro in tank feeding to surge tank.. Then two 044 Bosch pumps feeding to fuel rails...
_________________ As in ZOOM 126 edition |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 25 guests |