Hi everyone,I have recently replaced a t5 (EB 5l).In doing this I had to replace the Flywheel,Clutch,Pressure plate and spigot bearing rear main seal(all New).
B4 the replacement I had a lot of clutch shudder In first gear only,from stand still,under normal acceleration as well as problems with the tranny and suspected a leaking rear main seal.The shuddering didn't improve and I replaced the engine mounts incl. the tranny mount.
The problem is still there but not as bad.Have checked the uni joints while the tail shaft was off and can't see that they are the cause.
Does anyone have any ideas?maybe something I missed?

HAD THE SAME PROBLEM WITH MY AU GEARBOX WAS SHAGGED