|
| cmelvo |
|
||
|
can anyone shine some light on this problem i have
all 3 brake lights have stoped working on my el. i have checked the blubs and also the fuses. is there anything else i should be checking |
||
| Top | |
||
| twase |
|
|||
|
Brake light switch will be faulty, common problem. I don't recommend replacing it your self unless as you need to disconnect the brake peddle from the brake system with obvious concequences if you get it wrong.
Cheers TW.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| Vic |
|
|||
|
If the brake lights are not coming on then it's either your Stop Lamp / CC fuse or the brake light switch on top of the brake pedal has failed.
If it's the brake light switch then don't stress, you can buy aftermarket ones and fit it yourself.
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| cmelvo |
|
||
|
thanks a lot guys i thought it might of been that switch
|
||
| Top | |
||
| madmax |
|
|||
|
twason wrote: Brake light switch will be faulty, common problem. I don't recommend replacing it your self unless as you need to disconnect the brake peddle from the brake system with obvious concequences if you get it wrong.
Cheers TW. You don't need to disconnect the pedal, the switch is very easy to replace, takes about 5mins.
_________________
|
|||
| Top | |
|||
| Mako |
|
||
|
yea it is easy as pie to change... as long as you have little hands and arms with 3 elbows
na it is quite easy, as i have done it twice so far on my EL. i have a copy of the doc from FM1.0 on how to do it if you want, i dont think its been put back up yet? 
_________________ Regency Red EL Fairmont - PH4480 - 2.5" exhaust - High flow cat/muffler - K&N panel filter - Mandrel bent air intake - T series intake - wade 1604 cam - 98 EL XR6 ECU - Whiteline lows - 17" ROH RT's - Koni yellows - DBA Slotted's - Green Stuff pads
|
||
| Top | |
||
| falconfire |
|
||
|
i had the same problem with my 96 falcon, on your brake pedal you'll find a metal switch, it has a spring in it. give it a lubricate. you may need to take it out, see how you go... that worked for me
_________________ Gone V8 hunting! be back in a second |
||
| Top | |
||
| EFNWIKD6 |
|
||
|
cost me $65 at ultra tune. inc a few other bits. so if you can find sum1 gracsious enuff to tell u how 2 do it, go 4 it, if not you know the rough $$$ cost.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 43 guests |
