|
| WILLDB |
|
|||
|
I've got a BA XR6 N/A which I have been noticing over the past couple of months has been using a little bit of oil. (not much but noticably different on the dipstick -it has gone down by about 1/5 of the way from the Full mark to the Add Mark) It doesnt have any external signs of leaks, nor around any of the seals. Is this normal usage or should I investigate further? Its only done ~<54000km
BTW car is stock with only K&N filter and Typhoon CAI.
_________________ 2004 BA XR6 Manual in Blueprint Blue |
|||
| Top | |
|||
| Redford |
|
|||
|
are you using a synthetic oil, like (eg) mobil 1?
_________________ Speed Safely! |
|||
| Top | |
|||
| fnp |
|
|||
Age: 39 Posts: 4401 Joined: 25th Mar 2005 Ride: BA XT, BA XR6T, ED Ghia 5.0 Location: Perth |
Neither of my BA's use any oil whatsoever. I'd be looking into it.
_________________ What's the difference between a Holden and a sheep? It's less embarrasing getting out of the back of a sheep.. |
|||
| Top | |
|||
| WILLDB |
|
|||
|
Redford wrote: are you using a synthetic oil, like (eg) mobil 1?
Yes. It hasnt gone down by much but it is still noticably different to when the oil was changed. Ill look at the car from underneath and see if theres any signs of leakage. It isnt blowing smoke or running rough or anything so I dont know whats going on.
_________________ 2004 BA XR6 Manual in Blueprint Blue |
|||
| Top | |
|||
| xpression |
|
|||
|
try changing the pcv valve. I've seen a few BA's use small amounts of oil through the pcv
|
|||
| Top | |
|||
| WILLDB |
|
|||
|
xpression wrote: try changing the pcv valve. I've seen a few BA's use small amounts of oil through the pcv
I did the PCV valve "rattle" test and it sounds fine, and the valve itself looks in good condition, would it still be a good idea to change it nethertheless? I checked the car from underneath and I cannot see any leaks, the car doesnt blow any smoke and I dont thrash it either so I'm a bit baffled as to what can be causing it. 
_________________ 2004 BA XR6 Manual in Blueprint Blue |
|||
| Top | |
|||
| xpression |
|
|||
|
theyre only worth about $8 genuine from ford and the design of the valve got changed about 12 months ago to stop small oil usage concerns so yeah its worth a try.
also whats t he history of the car? |
|||
| Top | |
|||
| WILLDB |
|
|||
|
xpression wrote: theyre only worth about $8 genuine from ford and the design of the valve got changed about 12 months ago to stop small oil usage concerns so yeah its worth a try.
also whats t he history of the car? Im the second owner - Car has been serviced every 10000kms rather than 15000km as per book. Always serviced at the ford dealer (log book shows)
_________________ 2004 BA XR6 Manual in Blueprint Blue |
|||
| Top | |
|||
| xpression |
|
|||
|
the first owner of the car wasnt hertz or something like that was it?
|
|||
| Top | |
|||
| WILLDB |
|
|||
|
xpression wrote: the first owner of the car wasnt hertz or something like that was it? Hahahaha no - it was some guy in Brisbane - I bought it from Torque Ford in Brissy which is where this guy got it and had it serviced subsequently. I have never seen a Manual Falcon as a rental car anyway.
_________________ 2004 BA XR6 Manual in Blueprint Blue |
|||
| Top | |
|||
| 67RCE |
|
||
|
was that Torque Ford at Strathpine? if so one of the members here is a mechanic there
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| WILLDB |
|
|||
|
67RCE wrote: was that Torque Ford at Strathpine? if so one of the members here is a mechanic there Yes.
_________________ 2004 BA XR6 Manual in Blueprint Blue |
|||
| Top | |
|||
| WILLDB |
|
|||
|
Accidental double post.
_________________ 2004 BA XR6 Manual in Blueprint Blue |
|||
| Top | |
|||
| xpression |
|
|||
|
haha fair enough. thats a valid point altho i have seen manual cars on theyre fleet before
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 79 guests |
