|
| 67RCE |
|
||
|
The brakes in my AU have become spongy and have nearly no pedal feel, do i just need to bleed the brakes or is there another major issue that could be causing this?
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| Paulmac |
|
||
|
Check brake fluid and pads, refill if fluid low, replace pads if thin, bleed brakes.
If that doesn't restore pedal firmness it may be a master cylinder problem. If the fluid is very low check for signs of leaking near the master cylinder and on the inside of the wheels. Paul
_________________ What goes around, comes around. |
||
| Top | |
||
| XR Lita |
|
||
|
If the pedal doesn't drop while you are sitting holding your foot on it, your master is fine.
More than likely your rotors, and pads need replacing. Check them first, then give it a full flush and bleed. Should solve it (depending on if the pedal drops while sitting)
_________________ Signature removed - Forum Guidelines forbid commercial advertising
|
||
| Top | |
||
| 67RCE |
|
||
|
{USERNAME} wrote: If the pedal doesn't drop while you are sitting holding your foot on it, your master is fine.
More than likely your rotors, and pads need replacing. Check them first, then give it a full flush and bleed. Should solve it (depending on if the pedal drops while sitting) Pads have plenty left on them, the rotors are slightly warped, the pedal gets firm about 3/4 of the way down, but gets harder if pumped. would the fluid be the issue?
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| XR Lita |
|
||
|
When was your fluid last changed? If the rotors are warped, you really should change them, or at least measure them up to see if they are able to be machined true again
_________________ Signature removed - Forum Guidelines forbid commercial advertising
|
||
| Top | |
||
| ELGT |
|
|||
|
{USERNAME} wrote: If the pedal doesn't drop while you are sitting holding your foot on it, your master is fine.
More than likely your rotors, and pads need replacing. Check them first, then give it a full flush and bleed. Should solve it (depending on if the pedal drops while sitting) The pedal should drop when holding it, with car off, then starting car, indicates booster is working when vacuum is applied. |
|||
| Top | |
|||
| 67RCE |
|
||
|
{USERNAME} wrote: When was your fluid last changed? If the rotors are warped, you really should change them, or at least measure them up to see if they are able to be machined true again
I really dont have any idea when anything was done as i only got the car about 3 months ago
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| cjh |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: When was your fluid last changed? If the rotors are warped, you really should change them, or at least measure them up to see if they are able to be machined true again I really dont have any idea when anything was done as i only got the car about 3 months ago All the more reason to do a major service so as YOU know where its at in the service stakes. Engine oil, diff oil, auto trans service, or if manual, g'box oil, P/S oil, coolant, brake fluid, all the filters, s/plugs, check condition of brake pads, fanbelt, wiper rubbers, etc, etc.......the list goes on.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| jasonk |
|
||
|
as above do a major service, flush\replace the fluid.Do the rotors and pads,just done this to my car was happy with the improvement.
dont use cheap pads either |
||
| Top | |
||
| 67RCE |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: When was your fluid last changed? If the rotors are warped, you really should change them, or at least measure them up to see if they are able to be machined true again I really dont have any idea when anything was done as i only got the car about 3 months ago All the more reason to do a major service so as YOU know where its at in the service stakes. Engine oil, diff oil, auto trans service, or if manual, g'box oil, P/S oil, coolant, brake fluid, all the filters, s/plugs, check condition of brake pads, fanbelt, wiper rubbers, etc, etc.......the list goes on. thats the plan, the only thing i know that has been done is the box oil, cause that wass done when the clutch got done last week
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 27 guests |
