|
| madeaspack |
|
||
|
ok ive got the turbo on my car so i have for sale
6cyl e series and au hm headers stainless extractors 3into2 rrp is like $700, could do with a fresh coat of paint just to make them look new again.will not bolt to standard cat without mods.after $300 can send pics by mobile pick up only ef el 6cyl twin exhaust tail pipe with chrome tips,requires bumper to be cut to fit the larger r/h tip and l/h side to be cut to fit l/h tip,comes with centre peice of exhaust hm headers 2 1/2" mild steel with 1 muffler,the welds on the twin tail pipe arent very neat looking but they are very secure and dont leak asking $300 can send pics on mobile of it off the car,pick up only 
complete ba air intake assy,comes with cold air intake(standard size) airbox,and pipes to throttle body after $70 plus post also have a 10,000km old crow stage 3 camshaft to suit ea-non hybrid el,comes with adjustable cam gear,reccomend running with chiptorque chip and will need upgraded valve springs after $300 can send pics by mobile,pickup only and finally a 3.9:1 LSD diff in an ea housing,has 25 spline centre,about 7,000kms old i got it new from g and j drivelines in dandenong for $900,makes for awesome excelleration after $350 can send pics by mobile,pick up only
_________________ 97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump |
||
| Top | |
||
| Joesau |
|
||
|
hey mate i'd be interested in first bit of the intake off the throttle body, the bend. if you wanna sperate
|
||
| Top | |
||
| znipa-x |
|
|||
|
can we get some photos of behind the rear bar, I want to see what type of work would be required to mod to a V8, also does the rear skirt come with it.
_________________ former FORD V8 owner |
|||
| Top | |
|||
| del_futura |
|
|||
|
hey,
do u know if the extractors will fit cars on gas? also what model and how old are they? thanks -del |
|||
| Top | |
|||
| madeaspack |
|
||
|
rear skirt does not come with it,a hole will need to be cut in your bumper,which is not hard to do.
now that i think of it the tail pipe would fit a v8,so long as the fuel tank is in the same spot as a 6,the flange on the tail pipe is in the original spot so it should be good.i dont have pics of it on the car underneath tho will find out model number of extractors
_________________ 97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump |
||
| Top | |
||
| madeaspack |
|
||
|
http://www.hmheaders.com.au/products/in ... roductid=5
theres the likk to extractors,rrp $522.89 part no hm102ss
_________________ 97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump |
||
| Top | |
||
| Joesau |
|
||
|
how much do you want for intake pipe? and can you COD it to Lara 3212
|
||
| Top | |
||
| madeaspack |
|
||
|
i would rather not seperate
the extractors will fit some cars on lpg depending on the convertor bracket
_________________ 97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump |
||
| Top | |
||
| Joesau |
|
||
|
i'll offer $25 buks. up to you thanks.
|
||
| Top | |
||
| madeaspack |
|
||
|
ba intake setup sold pending payment
_________________ 97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump |
||
| Top | |
||
| madeaspack |
|
||
|
bump
_________________ 97 el xr6,5 speed short shifter,sequential scoop,no arial,freshly resprayed,low on 17's,3 inch zorst,stainless hi flo cat,snort stage 3 stainless manifold,garrett t04e,front mount cooler,wolf 3d ecu,seimens 760cc injectors,walbro fuel pump |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 50 guests |
