|
| Grumblexr6 |
|
||
|
Silly question and done a serch but are they the same at all, I had a AU engine in my XH and now a mate has asked with the AU fit into his XG but Im not sure if there running same Xmember, K frame, Thanx
|
||
| Top | |
||
| Trikee |
|
||
|
primarily the same block so should bolt in place except for where you would've had to slightly harass the sump a bit i'd say.
otherwise its the same motor as the xh |
||
| Top | |
||
| The Dog |
|
|||
|
Hey Grumbles, I have got to the stage where I won't do this normally but you have helped me out before so If you want I can go out and take a pic of the crossmember in my XH so you can make a comparison. Let me know mate.
_________________ You'll ride a black tornado across the western sky
|
|||
| Top | |
|||
| Grumblexr6 |
|
||
|
Thanx guys yea i have an XH but havent seen an XG 1 thats all as a mate would like to know if he can do what I have done with the AU motor, be easy if he lived closer and the car was running, I had a feeling they where running same motor as the XH and if they are same k frame he can just do what I did with my frame just mod it to fit, Thanx
|
||
| Top | |
||
| The Dog |
|
|||
|
No worries mate. Didn't know if you still had access to an XH or not
 . I would imagine they are the same (but my imagination is pretty good: for example I imagine my Datsun is a good ute ) as they did have the same engine so it's sort of a case of 2+2 might actually = 4 for a change 
_________________ You'll ride a black tornado across the western sky
|
|||
| Top | |
|||
| Tocchi |
|
|||
|
this might help - shows the XG swaybar and K-frame
 
|
|||
| Top | |
|||
| Krytox |
|
|||
|
XH has a completely different X-member.
XG = Steering box XH = Rack Im pretty sure the sump has more room in an XG than the XH, You'd have to measure the sway bar.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| cjh |
|
|||
|
The XH has a removeable K frame ( for want of a better word ).
The XG doesn't have a removeable X member, unless you cut it out with a 9" grinder or oxy-acetylene torch....lol The donks are basically the same, just have to swap over sumps and oil pick ups.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Grumblexr6 |
|
||
|
Thanx for that I now know what were facing here thanx for the replys
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 20 guests |
