|
| Big Tilly |
|
||
|
yes yes i know this topic would have been covered dosens of times but im in dire need of a quick answer...do i need to rip the entire dash out to get to the pedal box to re-enforce it?????
cheers guys
_________________
|
||
| Top | |
||
| cjh |
|
|||
|
I can't quite remember, but I think No, but in the EF/EL, you do.
I think on the EA to ED, you pull out the inst cluster to get the top nuts.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Big Tilly |
|
||
|
sweeeeet cheers mate, was kind of dreading ripping the whole dash out...ill have a go over the weekend, got some new door trims to fit while im at it so ill be a busy beaver
_________________
|
||
| Top | |
||
| cjh |
|
|||
|
You may have to remove the steering column too, I think.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| TROYMAN |
|
||
|
unfortunatly you do.
well atleast enough to undo the 3 bolts up the top. its the same thing with ef/el... you have to remove the consol undo and all the screws and bolts holding the dash to the body and undo the steering column pull the dash back about a foot and you can get to the bolts.. if your woried about damaging the interior i would remove the whole dash. i removed the whole dash to do mine.. |
||
| Top | |
||
| Big Tilly |
|
||
|
cheers guys, gonna attempt it this weekend
 im removing the front seats...gotta protect teh leather bahahaha
_________________
|
||
| Top | |
||
| cjh |
|
|||
|
I just did an EF pedal box today. Had to remove the centre console, the whole dash assembly and drop the column.
The moron that owns the car had been driving it for so long with the pedal box buggered, that it started to cut/wear through the clutch pedal, and the pivot pin on the top of the pedal where the cable hooks onto, was cracked, bent & had big grooves worn in it. So, made a new pivot pin for the top, put a new pedal box in ( modified it first before installation ), fitted a new clutch cable ( old one was fried from the exhaust ). Luckily, the firewall is all good.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Big Tilly |
|
||
|
yeh bad luck with mine, as in most EA's my firewall is f**k, has been re-enforced once before
_________________
|
||
| Top | |
||
| cjh |
|
|||
|
{USERNAME} wrote: yeh bad luck with mine, as in most EA's my firewall is f**k, has been re-enforced once before
My 88EA is a factory 5sp and the firewall has never cracked, and the pedal box has never been replaced or repaired. I have an RPM clutch in it now, has been for over 2 yrs, and no probs yet, touch wood.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Paulmac |
|
||
|
Here's a link with some pix attached.
http://www.fordforums.com.au/showthread.php?t=11205476 Paul
_________________ What goes around, comes around. |
||
| Top | |
||
| Big Tilly |
|
||
|
cheers bud, lol if only i can remember my p/w for that forum
cheers
_________________
|
||
| Top | |
||
| Paulmac |
|
|||||
|
Sorry Big Tilly, I thought you could just click on the link and view it as a visitor but not post unless you logged in.
Here's two I could find, damned if I know where the dash one's are. It's an auto but the attachment's the same. Cheers, Paul
_________________ What goes around, comes around. |
|||||
| Top | |
|||||
| Big Tilly |
|
||
|
cheers for that mate, i ended up finding my password for my old MKIIESKY account lol
starting it today  missing out on motorvation to do it tho....
_________________
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 27 guests |
