Fordmods Logo

Lost Brakes 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: Lost Brakes
Posted: Sat Jan 19, 2008 10:12 am 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 581

Joined: 5th Mar 2007

Gallery: 13 images

Ride: EF Fairmont AU Falcon FG XR6

Location: Eastern Suburbs,VIC
VIC, Australia

i was driving home from work yesterday and 5mins before i got home it felt like i had no brake fuild left i got her home checked the fulid it was full but still didnt have brakes i dont know why the brakes wont pump up i was thinkin if i pump em up and theres a leak it would piss out everywhere but nothing

only thing i can think of is the pedel box (not sure might not have anything to do with brakes)

it does leak from what i think is a sesor attached to the brake booster itsself it normally leaked out along the wires which plug into it now that has stopped is that senor gone is that why i dont have brakes

and help would be great id normally just get onto it and fix whatever problems my car has

but is the last 2 months shes only been driven to work 9 times coz of all the problems she has

rotors are perfect with no leaks heps of pads im stumped what it could be

cheers justin

 

_________________

My Fairmont

Last edited by Luxo Sprint on Sat Jan 19, 2008 10:14 am, edited 1 time in total.

Top
 Profile  
 
 
Posted: Sat Jan 19, 2008 10:14 am 
Getting Side Ways
Offline

Age: 35

Posts: 554

Joined: 24th Mar 2007

Gallery: 2 images

Ride: ef 5 speed

Location: melbourne
VIC, Australia

bleed you brakes could have air in the lines

 

_________________

i am in need of a new front bar or good condation secondhand for a 95 ef futra,
lsd for a for ef ,modifed au sump to go in and ef , working air con compressor

Top
 Profile  
 
 
Posted: Sat Jan 19, 2008 10:22 am 
Getting Side Ways
Offline

Age: 72

Posts: 971

Joined: 11th Jan 2005

Ride: BA MK11

Location: West Melbourne
VIC, Australia

I found that old brake fluid loses strength. Take the time, and have someone help you to completely change your fluid. I did and the improvement was amazing.

 

_________________

The older I get the better I was!

Top
 Profile  
 
 
Posted: Sat Jan 19, 2008 11:00 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 1085

Joined: 6th Nov 2004

Ride: BF XR Turbo

Location: Castle Hill
NSW, Australia

doesnt have a vacuum leak does it? ie vacuum to the booster? listen closely for sucking noises as this will leave you with the same problem

 

_________________

BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator.

12.3 @ 114

Top
 Profile  
 
 
Posted: Sat Jan 19, 2008 12:20 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 581

Joined: 5th Mar 2007

Gallery: 13 images

Ride: EF Fairmont AU Falcon FG XR6

Location: Eastern Suburbs,VIC
VIC, Australia

mitchg911 wrote:
doesnt have a vacuum leak does it? ie vacuum to the booster? listen closely for sucking noises as this will leave you with the same problem


yea i will def look into that when i get home im at work right now working way 2 hard on double time rate

thanks for everyone for their replys i'll let ya know how i go

 

_________________

My Fairmont

Top
 Profile  
 
 
Posted: Sat Jan 19, 2008 9:11 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 581

Joined: 5th Mar 2007

Gallery: 13 images

Ride: EF Fairmont AU Falcon FG XR6

Location: Eastern Suburbs,VIC
VIC, Australia

yea had a play with it vac line is fine i pulled it off and it suckin air

im thinkin maybe the brake cyl has s**t it

i pump up brakes i would think there would be pressure of brake fulid then air bubbles but im getting no pressure at the brake cyl

how much are brake cyl worth these days

 

_________________

My Fairmont

Top
 Profile  
 
 
Posted: Sat Jan 19, 2008 10:42 pm 
Smokin em up
Offline
User avatar

Age: 50

Posts: 251

Joined: 22nd Mar 2006

Gallery: 7 images

Ride: EF XR6 manual

Location: S.E. Melbourne
VIC, Australia

Check the vac booster itself, I've seen them crack all the way from the outside to the master cylinder bolt . There was no real noise and couldn't see the crack unless you looked for it, (even though it was about 12 cm long)

 

_________________

EF XR6 5spd 14.57@97mph
154rwkwts

Top
 Profile  
 
 
Posted: Sat Jan 19, 2008 11:50 pm 
Smokin em up
Offline
User avatar

Age: 44

Posts: 266

Joined: 8th Aug 2007

Gallery: 30 images

Ride: xd 351, AUII XR6.... R.I.P ef fa

Location: Prestons
NSW, Australia

Pitting in the master cylinder will cause a lose of brakes,
if the booster is gone the brakes will still work, but it will feel like pulling a truck up, you really got to push the pedal too the floor.
Change all the fluid, and get them bled. not a big job,
Pull the master cylinder off too, push the piston in, if you see pitting in the cylinder get a new one!!
saftey first!!

 

_________________

<a href="http://s154.photobucket.com/albums/s278/stephen351/?action=view¤t=resize2.jpg" target="_blank"><img src="http://i154.photobucket.com/albums/s278/stephen351/resize2.jpg" border="0" alt="resize"></a>

Top
 Profile  
 
 
Posted: Sun Jan 20, 2008 9:25 am 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 2637

Joined: 5th Nov 2004

Ride: EL TURBO GHIA

Power: 372 rwkw

Location: penrith
NSW, Australia

id say you have a split in ya booster thats what happened to me

 

_________________

HMMMM BOOST !!!


ED fairmont R.I.P

STREET FORDS FEATURE CAR ISSUE 42

Top
 Profile  
 
 
Posted: Sun Jan 20, 2008 9:39 am 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

it sounds your break master cyl has failed.


why take a risk with life ..just replace it with a knew one.. i paid about $160 for a new one about 3 months ago....
Top
 Profile  
 
 
Posted: Sun Jan 20, 2008 10:09 am 
Getting Side Ways
Offline

Posts: 2464

Joined: 5th Nov 2004

Gallery: 7 images

Location: Brisbane
QLD, Australia

Like the others are saying - Sounds like Master Cylinder Failed.

The Vac Boster will make the pedal ROCK HARD, but you will still be able to slow down (A little).

The Master Cylinder usually fails and the pedal creeps to the floor while your on the brakes. Replace it and things usually come good.

That said, if your pulling the master cylinder Id throw in some nice braided brake lines at the same time!
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 15, 2024 2:33 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names