|
| needfordspeed |
|
||
|
Hey guys I'm selling a set of ACL Race series pistons to suit any falcon I6 motor from EA-EL (non hybrid) the part number is to suit EB-ED but they will work any anything from EA-EL as said above.
All the specs are on this site: http://www.aclperformance.com.au/6MKRY9400.htm Only reason i'm selling is to buy the EA pistons because they will be better for my application. I know three different falcons that have used these pistons and they have made 460rwkw, another made 413 rwkw and another made something similar but has run 10's. Any questions etc call/sms me on 0422 162 734. Cheers
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| XGCOWBOY |
|
|||
|
prices??
_________________ Its On Like Donky Kong!
|
|||
| Top | |
|||
| Sloxr6 |
|
|||
Age: 40 Posts: 862 Joined: 8th May 2005 Ride: BA Wagon Turbo, Ba Fairlane G220 Location: Colac |
yes prices would be good. If you are interested i have a set of ea pistons 20 over tho, they are used but are like brand new could organise a swap plus cash diff if interested.
_________________ Congo Green Ba Wagon With F6 6 Speed Manual Driveline. |
|||
| Top | |
|||
| needfordspeed |
|
||
|
Price is $150, these are brand new btw.
Dellar69: Sorry mate, i'd rather just buy brand new ones. Cheers
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| needfordspeed |
|
||
|
All PM's replied to.
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| Redford |
|
|||
|
hi, how much for postage to qld?
{USERNAME} wrote: Only reason i'm selling is to buy the EA pistons because they will be better for my application.
just out of interest why would stock ea pistons be better as they arent forged and are heavier.
_________________ Speed Safely! |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
Lower compression ??
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Redford |
|
|||
|
heh i just realised these pistons are cast not forged
_________________ Speed Safely! |
|||
| Top | |
|||
| needfordspeed |
|
||
|
I'm buying the EA race series ones because they'll lower the comp.
Will post to anywhere in Aus for $20.
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| needfordspeed |
|
||
|
Sold pending payment
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 77 guests |
