|
| mickoxhxr8 |
|
||
|
The water pump fitted to 6cyl have that heater hose comin out of it which leaks at the joint and wont f**Kn stop. any quikfix to this.
can you buy waterpumps without it fitted??? |
||
| Top | |
||
| MMD |
|
||
|
there should be an o-ring at the back never had 1 leak, you can always put a bit of silicon around the pipe. just make sure it is dry might be a pain to get off later though
|
||
| Top | |
||
| phongus |
|
|||
|
did you fit the water pump yourself? or did you get someone to do it? If you did it yourself, you should have replaced the O-ring at the back of it...they always need to be replaced once removed.
If someone else did it for you, tell them to do their job right and fix the problem for you. phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| mickoxhxr8 |
|
||
|
had no idea it had an oring when I fitted the pump. thanx fellas. easy fix.
2nd hand pump and connector is tight/ seized so i thought it came like that. |
||
| Top | |
||
| mickoxhxr8 |
|
||
|
had no idea it had an oring when I fitted the pump. thanx fellas. easy fix.
2nd hand pump and connector is tight/ seized so i thought it came like that. |
||
| Top | |
||
| jonathon |
|
|||
|
when i fitted my water pump i used a bit of grease to hold the gasket and o ring in place
_________________ Owning 1 of 84,847 ebII. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 62 guests |
