Fordmods Logo

EF starter motor 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: EF starter motor
Posted: Wed Jan 30, 2008 12:44 am 
Oompa Loompa
Offline

Age: 86

Posts: 23

Joined: 30th Jan 2008

Location: Hobart
TAS, Australia

G'day. I'm a new boy, just joined.
I'm having trouble removing the starter motor on my EF. The bottom bolt was easy but how the heck do you get at the top one??
I've got every spanner, socket and tool for any job but this bolt has got me beat.
Any suggestions much appreciated. Cheers
Top
 Profile  
 
 
Posted: Wed Jan 30, 2008 12:51 am 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

13mm socket - experiment to get the right length extensions - undo top first, then bottom, then vice versa to refit.
Don't forget to disconnect the battery -ve first - otherwise the spark show can get scary . . . .

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
Posted: Wed Jan 30, 2008 1:10 am 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

WHS^^^^

put the bottom bolt back in first! as it will hold the motor in while u take the top bolt off

u need a few extension bars!

 

_________________

RIP SCOTT

Top
 Profile  
 
 
 Post subject: EF starter motor
Posted: Wed Jan 30, 2008 12:24 pm 
Oompa Loompa
Offline

Age: 86

Posts: 23

Joined: 30th Jan 2008

Location: Hobart
TAS, Australia

JEEZ!!! I didn't expect a reply so soon...thanks guys.
I'll have another go today. I've got all the extensions and sockets known to man but this is a sod. I presume I attack it from ABOVE not below??
I expect my next question will be " how dya get the b...d back in!!"
Anyway fingers crossed & thanks again for prompt replies. Ed
Top
 Profile  
 
 
Posted: Wed Jan 30, 2008 12:27 pm 
Tyre Shredder
Offline
User avatar

Posts: 396

Joined: 22nd Aug 2006

Ride: ED Fairmont Ghia, XH Outback, EF

Location: Gnangara, Perth
WA, Australia

I found the best way was a 13mm ratchet spanner mate.

 

_________________

Image

Top
 Profile  
 
 
Posted: Wed Jan 30, 2008 12:49 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1063

Joined: 22nd Aug 2006

Gallery: 20 images

Ride: FG XR8, F6 F6 ute, XR5T, Capri

Location: Perth
WA, Australia

i had to use a heap of extensions to get to it, from behind gearbox. lol
Top
 Profile  
 
 
Posted: Wed Jan 30, 2008 4:28 pm 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

I've always found it easiest from underneath - you preferably want the ratchet handle to just clear the front of the starter - being a lefty, I use my right hand to guide the socket and extension onto the upper bolt which I can only feel with fingers - same deal with the bolt when putting it in.

As Frank says, nip up the lower bolt to hold the starter in pozzy before fitting the upper bolt.
Once you get the knack, shouldn't be any more than 10 mins to remove or install.
Of course remember those two wires and battery -ve also.

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
 Post subject: EF starter motor
Posted: Thu Jan 31, 2008 12:24 pm 
Oompa Loompa
Offline

Age: 86

Posts: 23

Joined: 30th Jan 2008

Location: Hobart
TAS, Australia

:D I DID IT!!! Thanks a heap for all the tips. That was the secret...to attack it from UNDER the car. I'm never too old to learn. CHEERS!! Ed :oops:
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Nov 28, 2024 9:58 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names