|
| alsxy1 |
|
||
|
hi guys i have a windsor short block thats out of an 1970 model xy and intend to fit it in my ef 5litre what mods are needed or are the blocks the same cheers.
|
||
| Top | |
||
| fairy v8 |
|
||
|
if its genuinely a 1970 block .....the 69- early 70,s are the strongest blocks in the main webbing .....would be excellent to get big horses out of especially if its std bore
|
||
| Top | |
||
| AXR88U |
|
|||
|
More than likely you will have to do an emissions test to prove that the old block engine complies with ADR37/00
_________________ ________________________________________
|
|||
| Top | |
|||
| cjh |
|
|||
|
XY's didn't have Windsors, had Clevo's, XW was the last to have a Windsor. Remember phase 1 XW GTHO had 351W and the phase 2 XW GTHO had the 351C.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Matt_jew |
|
||
|
You could get a 302 Windsor in an XY from the factory. It was only the 351 Windsor that was replaced by the Clevo in the XY.
_________________ {USERNAME} wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| cjh |
|
|||
|
{USERNAME} wrote: You could get a 302 Windsor in an XY from the factory. It was only the 351 Windsor that was replaced by the Clevo in the XY.
According to my Ford ID book, XY's were only fitted with a Clevo. And also says the XW's were fitted with both. And in my workshop manual on them, says the same thing.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 16 guests |
