Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Heater Tap 

 

Page 1 of 1 [ 9 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
Linzo
 Post subject: Heater Tap
Posted: Fri Jul 07, 2006 7:00 pm 
Stock as a Rock
Offline
User avatar

Posts: 146

Joined: 2nd Apr 2006

Gallery: 3 images

Ride: EL XR6

Location: Otago
New Zealand
Hey fellas just thought i chuck this out there i was inspecting why my heater was absolute s**t today and checked the heater tap and lines for vaccum etc etc witch all turned out to be just fine so next step was to remove the heater tap witch i did and problem found!! the little rubber butterfly inside had all swolen up and was severly restricting my flow when my heater was on hot. So a quick trip down to ford for a newie which was slightly different by the way and now it is all good. So if anybody is experiencing similar probs this may well be worth a look in.

Nick
Top
 Profile  
 
 
WagonDad
Posted: Fri Jul 07, 2006 7:25 pm 
Getting Side Ways
Offline
User avatar

Age: 57

Posts: 480

Joined: 10th Feb 2005

Gallery: 28 images

Ride: EF Fairmont Station Wagon.

Power: 150 rwkw

Location: Mandurah
WA, Australia
Yeah Nick had the same problem, replaced the tap with a new all plastic one no worries.

 

_________________

4.0L EF Fairmont Station Wagon. EL GT Snorkel. K&N Pod in air box. 3" Intake piping.
Home port job. 1636 Wade cam. Wildcat Extractors, 2 1/2" cat and exhaust.
2200/2400rpm Dominator More Stall. Stage two mechanical shift kit. 3.73 4 pinion LSD. 15.078 @ 92mph.
Top
 Profile  
 
 
dcstraight
Posted: Fri Aug 18, 2006 9:30 pm 
Moderator
Offline
User avatar

Age: 46

Posts: 4654

Joined: 5th Nov 2004

Ride: Drives Like Fun

Power: 318 rwkw

Location: Melbourne Interior: Cappucino Exterior: Sparkling Burgundy
VIC, Australia
My heater doesn't work very well either - will have to check the heater tap methinks. All I get is 'luke' warm air if anything. I hope it's an easy / cheap fix - how much was a new heater tap just in case fellas ?

Thanks,
Steve

 

_________________

Vic Cruises & Events

Top
 Profile  
 
 
madmax
Posted: Fri Aug 18, 2006 9:35 pm 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 4102

Joined: 18th Nov 2004

Gallery: 10 images

Ride: PX2 Ranger 4x4 XLT Dual CAB

Location: Carrum Downs
VIC, Australia
I don't exactly recall how much the one I bought was, however it wasn't expensive <$20.
These taps are normally open without vacuum. So when you buy it it should be fully open. The one I got wasn't, so a slight bend in the actuator arm fixed that.

 

_________________

Image
She's meanness put to music and the b**ch is born to run!
Like the sign says, "speed's just a question of money. How fast can you go?"
Top
 Profile  
 
 
dcstraight
Posted: Fri Aug 18, 2006 10:12 pm 
Moderator
Offline
User avatar

Age: 46

Posts: 4654

Joined: 5th Nov 2004

Ride: Drives Like Fun

Power: 318 rwkw

Location: Melbourne Interior: Cappucino Exterior: Sparkling Burgundy
VIC, Australia
Ah ok thanks madmax - I'll scope it out tomorrow...damn these cold winter days with no heater lol.

 

_________________

Vic Cruises & Events

Top
 Profile  
 
 
Leroy
Posted: Sat Aug 19, 2006 2:24 pm 
Getting Side Ways
Offline

Age: 43

Posts: 3794

Joined: 9th Aug 2005

Ride: Hilux

Location: Mornington
VIC, Australia
ford part number YG 211 if anyone is interested

 

_________________

Now driving a Hilux
Top
 Profile  
 
 
4dxr6
Posted: Fri Feb 01, 2008 7:13 pm 
Parts Gopher
Offline

Age: 46

Posts: 82

Joined: 22nd Jul 2006

Gallery: 1 images

Ride: EF XR6

Location: Melbourne
VIC, Australia
How do I replace the Heater Tap on an EF 6 please? Instructions or directions to link pls.

Long story but it's not holding water and can't drive until replaced.
I have the new tap but can't find the instructions in the Gregory's manual either.
Please help ASAP
Top
 Profile  
 
 
heydonms
Posted: Fri Feb 01, 2008 8:46 pm 
Oompa Loompa
Offline

Age: 40

Posts: 34

Joined: 22nd Nov 2006

Ride: XF

Location: Perth
WA, Australia
Is it not just two hose clamps and a vacuum hose?
Top
 Profile  
 
 
4dxr6
Posted: Fri Feb 01, 2008 9:58 pm 
Parts Gopher
Offline

Age: 46

Posts: 82

Joined: 22nd Jul 2006

Gallery: 1 images

Ride: EF XR6

Location: Melbourne
VIC, Australia
Yeah you're right. Thanks dude, that was easy. Cheers.
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 9 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: No registered users and 62 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Nov 28, 2024 9:39 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names