Fordmods Logo

Car not starting 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: Car not starting
Posted: Sat Jan 26, 2008 2:48 pm 
Smokin em up
Offline

Age: 64

Posts: 213

Joined: 6th Nov 2004

Ride: Falcon RTV

Location: Maryborough
QLD, Australia

Wonder if someone else has had the same problem.What we thought might be a smartlock problem may not be.

My sons car would not start so thinking it might be the smartlock I replaced it with a mid series one and we still have the same problem.

The radio,wiper and fan all work on accessories but not when the ignition is switched to the on position.Could this be another problem elsewhere that I need to look.Any ideas would be appreciated .Thanks
Top
 Profile  
 
 
Posted: Mon Jan 28, 2008 12:45 am 
Getting Side Ways
Offline

Age: 24

Posts: 636

Joined: 5th Jan 2008

Location: Egg
SA, Australia

try putting the key in the on position until the locks cycle normally you have to do it when you replace the ecu or bcm or smartlock ign switch,

so try leave the key on until the locks cycle and see what happens as thats how other members have taught their replacement ecus and bcms to work off the original keys
Top
 Profile  
 
 
Posted: Mon Jan 28, 2008 1:13 am 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

yeah what fairmont1 mentioned. If the ECU and BCM has been reset due to no power (ie. unplugged battery) then it will need to relearn the key configurations. Leave the key in the ignition for 30 - 45mins and your locks will cycle signifying it has completed the "training".

Good luck and hope this works out.

phong =P~

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
Posted: Mon Jan 28, 2008 10:49 am 
Smokin em up
Offline

Age: 64

Posts: 213

Joined: 6th Nov 2004

Ride: Falcon RTV

Location: Maryborough
QLD, Australia

Sunday decided to investigate the rear of the ign barrel.All looked ok, nothing falling off or burnt.
Decided just to apply some light pressure to back of the ign switch where all the wires are connected and while pressing I heard the (slightest) click.Car now starts!!
Is it still worth taking it to a eleco to look at??
Top
 Profile  
 
 
Posted: Mon Jan 28, 2008 6:48 pm 
Getting Side Ways
Offline
User avatar

Age: 72

Posts: 2206

Joined: 8th Nov 2004

Gallery: 1 images

Ride: Esky

Location: Shit Creek
WA, Australia

maybe its the crank angle sensor

 

_________________

Team EGO

Top
 Profile  
 
 
Posted: Mon Jan 28, 2008 7:27 pm 
Smokin em up
Offline

Age: 64

Posts: 213

Joined: 6th Nov 2004

Ride: Falcon RTV

Location: Maryborough
QLD, Australia

I don't think so, you need power to the ignition for that to happen. lol
Top
 Profile  
 
 
Posted: Fri Feb 01, 2008 10:45 pm 
Fordmods Newbie
Offline

Posts: 3

Joined: 26th Jan 2008

Location: Melbourne
VIC, Australia

On my EL XR8 I have to start the car and then bring the key back about 2 or 3 mm's. I thought it was key wear initially but I have a brand new (factory) key that experiences the same problem. It's no drama though, it's been like that for the 5 yrs I've owned it.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 77 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Nov 19, 2024 10:43 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names