Fordmods Logo

Ef Intermitent starting problems? 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: Ef Intermitent starting problems?
Posted: Mon Jan 21, 2008 9:23 pm 
Tyre Shredder
Offline
User avatar

Age: 48

Posts: 363

Joined: 23rd Sep 2005

Gallery: 1 images

Ride: XR6 Wagon

Location: Perth
WA, Australia

Ok heres the problem. Having problem starting sometimes it does others it doesnt. If I keep turning the key eventually it will turnover and start. I have had the starter motor out and done the out of vehicle test it works fine. I have tried another starter motor it still does it. What could it be? Is it the ignition switch? Is it the smartlock system PLEASE Help?

 

_________________

ImageImage
EF XR6 Wagon,RPD R6 cam,Wildcat extractors, Magnaflow cat,2.5" Lukey exhhaust.
Too many more too list

Top
 Profile  
 
 
Posted: Mon Jan 21, 2008 9:31 pm 
Technical Contributor
Offline
User avatar

Age: 45

Posts: 4093

Joined: 20th Mar 2005

Gallery: 2 images

Ride: 2.0 Turbo VW

Power: 142 rwkw

Location: Seaford State:
VIC, Australia

Sounds like the typical BEM (body electrics module).

These are VERY common to have dry joints.

To diagnose, you would treat it as normal, Crank away... no good? Keep cranking while you smack the panel at your left knee.

If it goes, then theres your problem.

Do a search,

Bem replacement, smartlock etc.


When replacing these, you need to reprogram your remote fobs, and also the smartlock has to learn the ignition barrel (same if the ignition barrel is your cause of your malfunction)

Both very very easy, and should only waste around 45minsute of your time.

 

_________________

Carefree, we may not be number one, but we're up there.

Top
 Profile  
 
 
Posted: Mon Jan 21, 2008 9:42 pm 
Stock as a Rock
Offline

Age: 35

Posts: 161

Joined: 30th Sep 2007

Ride: XB ute, ED mont

Location: Kalamunda
WA, Australia

t could be your neutral switch on gearbox mates ef wagon does same thing just need to have it in park and pull bak on lever gently while cranking it.

 

_________________

ED Fairmont, XR lights, AU tickford 200kw, GT-P 18's, TwEEcer, 230kw, KAAZ LSD.

Top
 Profile  
 
 
Posted: Mon Jan 21, 2008 10:18 pm 
Tyre Shredder
Offline
User avatar

Age: 48

Posts: 363

Joined: 23rd Sep 2005

Gallery: 1 images

Ride: XR6 Wagon

Location: Perth
WA, Australia

OK neutral safety switch has been done its brand new so thats not it. Just tried bashing the BCM a few times no luck. Now I got nothing tried turning the key on and off heaps of times no luck?

 

_________________

ImageImage
EF XR6 Wagon,RPD R6 cam,Wildcat extractors, Magnaflow cat,2.5" Lukey exhhaust.
Too many more too list

Top
 Profile  
 
 
Posted: Mon Jan 21, 2008 10:38 pm 
Tyre Shredder
Offline
User avatar

Age: 48

Posts: 363

Joined: 23rd Sep 2005

Gallery: 1 images

Ride: XR6 Wagon

Location: Perth
WA, Australia

I can hear a relay under the dash clicking away as I try too start it but thats as far as I get.

 

_________________

ImageImage
EF XR6 Wagon,RPD R6 cam,Wildcat extractors, Magnaflow cat,2.5" Lukey exhhaust.
Too many more too list

Top
 Profile  
 
 
Posted: Tue Jan 22, 2008 9:06 am 
Getting Side Ways
Offline

Age: 44

Posts: 775

Joined: 27th Nov 2004

Ride: BA XT Series 2

Location: Cairns
QLD, Australia

Pull the cover off your steering column. Check the back of your ignition barrel. See if it is loose. That is what happened to mine. But I also lost all Accessories power.

Cam.

 

_________________

Stage 1 stereo install done. Pics in audio section.
Next step is probably a nice exhaust or stage 2 stereo.

Top
 Profile  
 
 
Posted: Wed Jan 23, 2008 2:32 pm 
Fordmods Newbie
Offline

Posts: 8

Joined: 5th Jan 2007

Ride: EBII Fairmont

Location: Melbourne
VIC, Australia

I had the same problem on my EBII Fairmont.
Try thumping the top of the dashboard while turning the key to crank the engine. Works everytime for me.....good luck :)
Top
 Profile  
 
 
Posted: Wed Jan 23, 2008 4:59 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 2550

Joined: 28th Jun 2005

Gallery: 13 images

Ride: EF 5 Speed, XH Uterus :P

Location: Hobart
TAS, Australia

JRWhy wrote:
I had the same problem on my EBII Fairmont.
Try thumping the top of the dashboard while turning the key to crank the engine. Works everytime for me.....good luck :)


that's a typical BEM/BCM dry solder joints problemo!

 

_________________

Maloo - Holden's word for ugly.

Top
 Profile  
 
 
Posted: Sun Feb 03, 2008 9:43 am 
Fordmods Newbie
Offline

Age: 45

Posts: 9

Joined: 26th Oct 2007

Ride: EF 2 Fairmont Ghia

Location: Coffs Harbour
NSW, Australia

My ef ghia does it nearly every second day. Just hold the key to the start position and bash the steering wheel with your left hand. Will replace BCM soon.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 63 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Nov 28, 2024 9:38 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names