im thinking bout getting a 2500rpm stally
im not going to pretend i know much about them

but i got a few questions

how much
where from
is 2500rpm enuff

i get my 977b cam soon my double valve springs and chiptorque chip (i belive i need a pggy back ecu and double valve springs to run my 977b)

im also thinking a head i have a head which is going to be ported for better flow and all the other good bits

my motor is pretty much stock but i want my stally in the same day i get my cam and valve springs

any help would be great
cheers

2500 is not enough, Ive got a dominator 2200/2400 thats only 200rpm above normal and I cant really tell the difference, this is with a Wade 1636 producing 150rwkw. The cam your looking at will have a higher power range and will need more rev's to get you going. Mine cost $460 but it was ordered wrong and had been siting on the shelf for while, expect to pay between $400 - $800 depending on brand and the quality of parts used.