Fordmods Logo

Tinted taillights 

 

Page 1 of 1 [ 15 posts ] 

 
 Post subject: Tinted taillights
Posted: Wed Feb 13, 2008 2:29 pm 
Stock as a Rock
Offline
User avatar

Posts: 174

Joined: 20th Jan 2006

Gallery: 2 images

Location: Melbourne
VIC, Australia

Is this hard to do yourself? I can't find any docco's on it.
Top
 Profile  
 
 
Posted: Wed Feb 13, 2008 3:09 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 4316

Joined: 30th Oct 2006

Gallery: 18 images

Ride: Envi EF

Location: Grafton
NSW, Australia

buy some night shades and spray the f**k - if you need a doco on that then lol

 

_________________

>>>EF Futura T build<<<

Top
 Profile  
 
 
Posted: Wed Feb 13, 2008 3:10 pm 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 10829

Joined: 17th Apr 2005

Gallery: 34 images

Ride: BF MK11 XR 6 TURBO ZF 6spd

Power: 225 rwkw

Location: glenwood/sydney
NSW, Australia

very very easy...

+ 1 can of "tint shade" (spray can)..
some electrical tape to get creative...
news paper for covering the excess over spray usually landing on the ground of the garage..
mediem screw driver to remove the two phillips head screws...

an hour or two of spare time...
Top
 Profile  
 
 
Posted: Wed Feb 13, 2008 3:22 pm 
Stock as a Rock
Offline
User avatar

Posts: 174

Joined: 20th Jan 2006

Gallery: 2 images

Location: Melbourne
VIC, Australia

That's all there is to it?
Top
 Profile  
 
 
Posted: Wed Feb 13, 2008 3:51 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

fordfreak ef wrote:
very very easy...

+ 1 can of "tint shade" (spray can)..
some electrical tape to get creative...
news paper for covering the excess over spray usually landing on the ground of the garage..
mediem screw driver to remove the two phillips head screws...

an hour or two of spare time...


That depends what car he/she has. Could be an EA - ED meaning he/she won't have 2 phillip head screws but rather 4 x 8mm (or 10mm?) bolts to remove the tail lights :P.

If you do have an EF/EL and this is your first time removing the tail lights, then after you remove the 2 screws you will have to tap the assembly out, it is held in by a socket type thing. I think you hit it side ways (ie. not towards the rear) to pop it off. Someone correct me.

Besides that...the fordfreak pretty much covered it.

phong =P~

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
Posted: Wed Feb 13, 2008 4:23 pm 
Stock as a Rock
Offline
User avatar

Posts: 174

Joined: 20th Jan 2006

Gallery: 2 images

Location: Melbourne
VIC, Australia

Should the lights be sanded down first?
Top
 Profile  
 
 
Posted: Wed Feb 13, 2008 5:01 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 948

Joined: 3rd Mar 2006

Gallery: 11 images

Ride: BA XR6 Ute

Location: Brisbane - Perth
QLD, Australia

Should ring ahead in let the cops know that they should write out your default notice, its pretty but its illegal.

 

_________________

nascentes morimur

Top
 Profile  
 
 
 Post subject: illegal??
Posted: Wed Feb 13, 2008 5:13 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 404

Joined: 4th May 2007

Gallery: 8 images

Location: Noosa
QLD, Australia

I thought that you can tint your lights as long as you leave the reflector free from the tint. My mate got done by the cops and they told him what was and what wasnt legal.

 

_________________

99 AU Fairlane Ghia V8 Black Leather, 19" ANZ 5+5's with 245/35 rubber
Full sound system. Extractors, Dual 2.25" exhaust.
Lowered on Tickford XR8 springs and shocks!!

Top
 Profile  
 
 
Posted: Wed Feb 13, 2008 5:13 pm 
Stock as a Rock
Offline
User avatar

Posts: 174

Joined: 20th Jan 2006

Gallery: 2 images

Location: Melbourne
VIC, Australia

Gregg_13 wrote:
Should ring ahead in let the cops know that they should write out your default notice, its pretty but its illegal.


Aha yeah. How about your clear tailights, eh?
Top
 Profile  
 
 
Posted: Wed Feb 13, 2008 5:17 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 948

Joined: 3rd Mar 2006

Gallery: 11 images

Ride: BA XR6 Ute

Location: Brisbane - Perth
QLD, Australia

I had red and Amber bulbs in place to I was alright, and below the lights on a BA there is a red reflector, but they are gone now anyway, purchased new ones from the states, got sick of buying red bulbs and dyeing them all the time.

 

_________________

nascentes morimur

Top
 Profile  
 
 
Posted: Wed Feb 13, 2008 5:19 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 948

Joined: 3rd Mar 2006

Gallery: 11 images

Ride: BA XR6 Ute

Location: Brisbane - Perth
QLD, Australia

Its not so much the reflector issue with tinting ats how much light the tint lets through, you can argue with the cops all night that the can says iot wont effect the transmission of light, don't mean they wont give you a fine, or worse.

 

_________________

nascentes morimur

Top
 Profile  
 
 
Posted: Wed Feb 13, 2008 5:26 pm 
Stock as a Rock
Offline
User avatar

Posts: 174

Joined: 20th Jan 2006

Gallery: 2 images

Location: Melbourne
VIC, Australia

Yeah, fair enough. I wasn't planning on completely blacking them out, was just going for a light tint.

So anyways, has anyone had any experience with doing this? Any advice/tips??
Top
 Profile  
 
 
Posted: Wed Feb 13, 2008 5:27 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 948

Joined: 3rd Mar 2006

Gallery: 11 images

Ride: BA XR6 Ute

Location: Brisbane - Perth
QLD, Australia

I'm not saying dont do it, if its a light tint I cant see them having a problem, but If someone is doing something that draws attention to their car for he wrong reason then there is no one else to blame, Trust me, been there.

 

_________________

nascentes morimur

Top
 Profile  
 
 
Posted: Wed Feb 13, 2008 6:23 pm 
Stock as a Rock
Offline

Age: 39

Posts: 151

Joined: 14th Nov 2006

Gallery: 22 images

Ride: EF Turbo & ED N/A 6

Location: Perth
WA, Australia

just tint them..... I love the look of mine, and hate the standard EF ones....

 

_________________

EF ECTIV
Garrett T04E, Custom grind 'Surecam', 55lbs injectors, polished plenum, 3 inch turbo exhaust,
T400 box, hi-stall, heavy duty tailshaft, KAAZ Diff with 3.91 ratio,
Coming Soon: Built forged motor & T04Z
"The ED" daily - SOLD
On the lookout for a cheap, stock EF

Top
 Profile  
 
 
Posted: Wed Feb 13, 2008 6:27 pm 
Getting Side Ways
Offline

Posts: 6113

Joined: 8th May 2007

timmay_73 wrote:
Any advice/tips??


if you dont care about the legalities, then i would buy a spare set of tailights and spray them...... so if you do get spoken to about them you can just swap them over instead of trying to get the s**t off your originals
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 15 posts ] 

Who is online

Users browsing this forum: No registered users and 56 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Nov 19, 2024 3:44 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names