|
| Southy |
|
|||
|
what's involved in putting a EB/ED XR6 6 bolt clutch onto a EA box as opposed to just using another 3 bolt EA clutch?
cheers |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
later e-series 6 bolt flywheel and matching clutch bolt straight in, provided you use both. ie: cant use later model clutch with early 3 bolt flywheel
i replaced mine not long ago |
||
| Top | |
||
| Southy |
|
|||
|
im talking about modifying the 3 bolt flywheel to fit a 6 bolt clutch
|
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
why bother modifying the ea flywheel?
its slightly smaller in diameter, plus you'll have to get a hold of the 3 dowels needed, then you got pay someone to drill and tap new holes to line up with the new clutch? better off just going to the wreckers and paying 70 odd dollars for the EBII onwards flywheel |
||
| Top | |
||
| snap0964 |
|
|||
|
http://www.fordmods.com/forums/viewtopic.php?t=61124
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| TROYMAN |
|
||
|
FordFairmont wrote: why bother modifying the ea flywheel?
its slightly smaller in diameter, plus you'll have to get a hold of the 3 dowels needed, then you got pay someone to drill and tap new holes to line up with the new clutch? better off just going to the wreckers and paying 70 odd dollars for the EBII onwards flywheel the ea flywheel is the same diameter as the rest its just the clutch plate and pressure plate are smaller in diameter.. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 81 guests |
