Fordmods Logo

Vibration at high revs 

 

Page 1 of 1 [ 5 posts ] 

 
 Post subject: Vibration at high revs
Posted: Tue Feb 26, 2008 3:40 am 
Oompa Loompa
Offline

Posts: 25

Joined: 10th Jun 2007

Location: Perth
WA, Australia

Just picked up an EL futura 5 speed, at 4500rpm to around 5200 it gets quite a bad vibration. It has done 200,000km, is it likely the harmonic balancer is gone? (do the straight 6 even run balancers?). The vibration is there with clutch in and revving it, does not appear to be in the drivetrain.

It also has developed an oil leak, it is somewhere under the intake manifold and is dripping down onto the rack, it is quite significant, i havnt got the car up in the air to have a look, anyone had this problem before?

Never buy a car from a car dealer!!
Top
 Profile  
 
 
Posted: Tue Feb 26, 2008 9:51 am 
Stock as a Rock
Offline

Age: 68

Posts: 157

Joined: 2nd Nov 2005

Ride: EA Fairmont

Location: Canberra
ACT, Australia

Hi There

1. YES they have a harmonic balancer. Might need checking.

2. I'd still check the tailshaft ( see if there's a mark where a
counterweight may have fallen off ) and uni joints.

3. Check engine mounts ??

4. Check gearbox cross member is secure.

5. Loose flywheel ??

6. Things I'd check for the oil leak....
Sump gasket
Possible head gasket
Timing cover gasket
Oil pressure sender unit
Oil filter loose

Get it in the air for a closer look - ramps will probably do.
Top
 Profile  
 
 
Posted: Tue Feb 26, 2008 11:12 am 
Getting Side Ways
Offline
User avatar

Age: 43

Posts: 1380

Joined: 6th Nov 2004

Gallery: 3 images

Ride: FPV BF MKII F6

Location: Brisbane
QLD, Australia

id check unijoints

 

_________________

OBS35N is gooonnnneeee.
Gone for good..... Damn fence posts!!!!!

OBS35N #2 (XXF6XX) just bought, bring it on

Top
 Profile  
 
 
Posted: Wed Feb 27, 2008 2:15 pm 
Oompa Loompa
Offline

Posts: 25

Joined: 10th Jun 2007

Location: Perth
WA, Australia

It was the oil pressure sender pissing oil, i have pulled the radiator out and the rubber on the balancer looks very average, maybe it has slipped?

it makes the vibration with the clutch in and in neutral so all i can really imagine is loose flywheel (hope not) or balancer, any other ideas??

cheers
Top
 Profile  
 
 
Posted: Wed Feb 27, 2008 3:05 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 556

Joined: 10th Dec 2006

Gallery: 4 images

Ride: EAII Falcon S

Location: Brisbane
QLD, Australia

sounds like it could be the flywheel bolts like gutza sugested. i had the same problem after doing donuts in my mitsubishi lancer (2.6ltr) it had bad vibrations also. the crank had to be redrilled and tapped with larger flywheel bolts cos the only other alternative was to rebuild it with a new crank.

other than that i would have no idea, its probably best to get a mechanic to check it out.

 

_________________

Speed Safely! ;-)

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Nov 28, 2024 11:49 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names